If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
What does the zionsville e36 rack coupler look like?
I actually just did the e36 m3 steering rack in my car and you don't need to buy anything from Zionsville. You can just use the coupler from your stock rack but it is too long in stock form. You have to grind the nub off the rack right before the splines where the coupler meets the rack. Then remove the rubber spacer on the coupler and shorten that distance down to 1/4", you will need to make a spacer for that part. Let me know if you have any more questions.
Comment