Anyone have one of these they can measure real quick? I'm looking to make something similar but with a cutout for a rear strut bar.
Announcement
Collapse
No announcement yet.
Lukebox Sub Dimensions
Collapse
X
-
I was asked in my thread, here is what I came up with:
Originally posted by parkerbink View PostBest I can tell with it installed it's height 11" width 35 1/4" depth 10 1/4".
[IMG]https://cimg4.ibsrv.net/gimg/my350z.com-vbulletin/550x225/80-parkerbsig_5096690e71d912ec1addc4a84e99c374685fc03 8.jpg[/IMG
-
Originally posted by parkerbink View PostI was asked in my thread, here is what I came up with:
Best I can tell with it installed it's height 11" width 35 1/4" depth 10 1/4".
Can you measure the depth of the base, and the depth of the top? trying to figure out the right angle.
Code:? ____ | \ 11 | \ ? |_______\ <- angle? 10 1/4"
sigpic
1987 325e Lachssilber w/ MarkD chip and late bumpers, Zender EVO spoiler, s3.25 LSD
Originally posted by nandoI don't think there's really strong evidence that ZDDP harms cats.
Comment
-
Hmm. Looks like that's a different model. I found this thread that lays it out.
The outside specs are:
W: 36"
H: 15" (dead nuts on, taller or shorted and you have issues)
Bottom Depth: 10"
Top Depth: 4"sigpic
1987 325e Lachssilber w/ MarkD chip and late bumpers, Zender EVO spoiler, s3.25 LSD
Originally posted by nandoI don't think there's really strong evidence that ZDDP harms cats.
Comment
-
I do not see how the dimensions would work for you to do a cut out for a bar.
Either the bar will block the height of a box, making it so you cannot push it in... or if you make it to go under the box, you won't have enough height to have a sub point into the cabin.
Good luck, but I'd mock up some cardboard before I tried anything.
Comment
Comment