Announcement

Collapse
No announcement yet.

more stuff! driveshaft/strut housings/mt1 wheel

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    more stuff! driveshaft/strut housings/mt1 wheel

    bimmerworld fog light deletes dirty but undamaged $25 plus shipping



    mtechI wheel in fair condition. some stitching is loose $150 shipped
    more photos upon request.



    a bit ugly but perfectly useable, mechanically good driveshaft.
    from 96 e36 m3. 6 bolt flange. fits zf trans
    will work with 24v swap with zf trans. $350 plus shipping.



    51 mm strut housings with coilover perches welded on. good for a coilover project. $90 plus shipping.

    Last edited by dirtbag30; 03-08-2018, 04:52 PM. Reason: added more parts to the listing


    i have no idea what i am doing with my life

    #2
    Driveshaft will not work with e30 diff unless you get a 4 bolt rear half


    Sent from my iPhone using Tapatalk
    "no, i didnt slap u...that was my hand giving ur face a high five"

    Comment


      #3
      Originally posted by amiller07 View Post
      Driveshaft will not work with e30 diff unless you get a 4 bolt rear half


      Sent from my iPhone using Tapatalk
      correct.


      i have no idea what i am doing with my life

      Comment


        #4
        Originally posted by amiller07 View Post
        Driveshaft will not work with e30 diff unless you get a 4 bolt rear half


        Sent from my iPhone using Tapatalk
        e36 shafts are more difficult to mix and match with the both universal being attached to the rear half. The e30 shaft has a universal on the end of each half making them easy to realign. The e36 has both on one half. This means you ave to phase the 3 prong yoke with correct geometry to a "4 prong" universal joint.
        john@m20guru.com
        Links:
        Transaction feedback: Here, here and here. Thanks :D

        Comment


          #5
          correction. to get this to fit in an e30, with 24v and zf trans you need the 6 bolt flange seen here as well
          i should have been more specific.
          its easy to change, how ive been running it in my car for the past three years.



          i have no idea what i am doing with my life

          Comment


            #6
            ^^^ Yup. Even the ZF trans can swap yokes with getrag, just have to modify the nut a little to fit in the center.
            john@m20guru.com
            Links:
            Transaction feedback: Here, here and here. Thanks :D

            Comment


              #7
              Bump. Buy these.


              i have no idea what i am doing with my life

              Comment


                #8
                Shorten strut housing? thanks

                Comment


                  #9
                  Originally posted by fight4life28 View Post
                  Shorten strut housing? thanks
                  No these are just stock length with perches welded on.


                  i have no idea what i am doing with my life

                  Comment


                    #10
                    bump


                    i have no idea what i am doing with my life

                    Comment


                      #11
                      bump. more parts added. help fund my bike addiction. i have alot of parts if you need something specific let me know. ill sell anything for the right price


                      i have no idea what i am doing with my life

                      Comment

                      Working...
                      X