ok, so ive been researching a little and havent found much on the subject. im about to order a 25mm master cylinder (as i currently dont have one at all) in my '84 s50 e30 318i but i need more info on the modification.
before someone comments, the rears are going to be swapped from drum to disc brakes.;)
mainly i want to know if anyone has done this before and maybe has a write up on T-ing off the front brake lines since the 735i MC only has two outlets and my car has three lines.... 2 for each front caliper and one that goes to both rears.
im assuming i need to bend my own brake line and totally remake my brake line setup. anyone done this?
appreciate anything you guys got, thanks!
before someone comments, the rears are going to be swapped from drum to disc brakes.;)
mainly i want to know if anyone has done this before and maybe has a write up on T-ing off the front brake lines since the 735i MC only has two outlets and my car has three lines.... 2 for each front caliper and one that goes to both rears.
im assuming i need to bend my own brake line and totally remake my brake line setup. anyone done this?
appreciate anything you guys got, thanks!
Comment