Hi all
I have a 91 BMW 312is with an M42 (Parts car)
Has not been run in a few years, trying to get it going.
Engine Cranks very well
Engine Sparks very well
Fuel Pump makes flow while cranking (removed pressure line and placed in a bucket)
Engine starts with a spray of ether in the throttle body ...
Pulled a plug and the injectors do not seem to be firing... Dry as a bone, no fuel smell
#1 - I will be removing the intake manifold to check for voltage at the injectors.
Is it worth it to check fuel pressure? I know it is flowing while cranking, but it does not try to fire at all.
Any other suggestions besides checking for voltage at the injectors?
I have read this thread already - https://www.r3vlimited.com/board/sho...d.php?t=225575
I dont think this is my problem because I have fuel flow...
Any other suggestions? I will be checking injector voltage tomorrow.
I have a 91 BMW 312is with an M42 (Parts car)
Has not been run in a few years, trying to get it going.
Engine Cranks very well
Engine Sparks very well
Fuel Pump makes flow while cranking (removed pressure line and placed in a bucket)
Engine starts with a spray of ether in the throttle body ...
Pulled a plug and the injectors do not seem to be firing... Dry as a bone, no fuel smell
#1 - I will be removing the intake manifold to check for voltage at the injectors.
Is it worth it to check fuel pressure? I know it is flowing while cranking, but it does not try to fire at all.
Any other suggestions besides checking for voltage at the injectors?
I have read this thread already - https://www.r3vlimited.com/board/sho...d.php?t=225575
I dont think this is my problem because I have fuel flow...
Any other suggestions? I will be checking injector voltage tomorrow.
Comment