FS: Solid Centered & Offset Front Control Arm Bushings

[imwhyteyo]

is any of this stuff compatible with IX? i know cabs are, but what about the other stuff? id be in immediately for some of that.

[silence]

I've got a set of the solid CAB's and am trying to get them onto a new set of control arms. I can't seem to get the lollipops onto the arms for the life of me.

Is it best to have the lollipops pressed onto the arms, or does dish soap usually do the job? I tried the soap method to no avail. Thanks for any help!

Oh and they shipped right away. Condor has been great to deal with!

Thanks! We try to ship as soon as parts are ordered :)

About your question, If the Control arm bushings are already perssed into the lolipops, and you are trying to get them on to the control arm, the best way to do it is with a block of wood and a rubber mallet. A few solid hits and it will slide right in.

[silence]

is any of this stuff compatible with IX? i know cabs are, but what about the other stuff? id be in immediately for some of that.

Im pretty sure the subframe bushings on an IX are different. It seems the subframe is lower on an IX. You may be able to flip our 12 mm Riser Bushings and install them upside down, but I have never done this, so i cannot confirm if it will work.

[Cephas]

Thanks! We try to ship as soon as parts are ordered :)

About your question, If the Control arm bushings are already perssed into the lolipops, and you are trying to get them on to the control arm, the best way to do it is with a block of wood and a rubber mallet. A few solid hits and it will slide right in.

Thanks brother! I had emailed you as well, so you can ignore that. I appreciate the support. People should buy from Condor if for no other reason that they support the customer after the sale.

[silence]

Thanks brother! I had emailed you as well, so you can ignore that. I appreciate the support. People should buy from Condor if for no other reason that they support the customer after the sale.

Anytime! That's what we are here for.

Guys, if you have any questions send an email to condorspeedshop@gmail.com

[trippmann]

alignment required if using the offset bushings?

[silence]

alignment required if using the offset bushings?

Not required, but suggested whenever you make any changes to the suspension. Unless you have camber plates, all you can do is get your toe adjusted.

[silence]

Let me know if you need any offset cabs.

[efficient]

Gonna be placing an order in the future once my car runs. My cars c.a rubber is all worn and you can see the big cracks.

[silence]

Gonna be placing an order in the future once my car runs. My cars c.a rubber is all worn and you can see the big cracks.

That's not good. Checkout www.condorspeedshop.com when you are ready. :)

[aaron_tupper]

Bushings

How much for a set of offset front control arm bushings?

[silence]

How much for a set of offset front control arm bushings?

Check the site for pricing.http://www.condorspeedshop.com

[silence]

Super easy to install.