E30 GC Rear Adjuster

[cbett1]

Does the rear control arm get drilled for the adjuster hat? If so, I would have to drill a big hole for the bolt head and socket to hate through the bottom ca, then a small hole for the bolt threads to go through and attach to the adjuster hat.

Sent from my SM-G975U using Tapatalk

[cbett1]

Discard the bolt, that's for e36 ta's. Lower co mount just sits on top of the lca hub per gc.

Sent from my SM-G975U using Tapatalk

[nrubenstein]

There is absolutley no need to bolt it down. Once it’s been loaded, removing it requires a pry bar, some penetrating oil, and a little patience if you don’t want to gouge the crap out of things.