Brake sensor change help!

[CharlieVu]

Last night while replacing my struts I decided to tackle the brake sensor light fix.

To my surprise the front left had a brake sensor bypass installed and the right rear sensor and wiring harness is missing.

Attached the sensor delete that was on the front left.

Need your guys help! I searched and searched but could not find any photos or videos of the right pass brake sensor harness and the e30 manual I have doesn’t have any detailed photos of the actual harness.

Can someone please help me by posting a few photos of where the wire harness is located and where the sensor plug should be? I might need to ghetto rig a new sensor harness but to do that I need to know where it’s coming from or if that isn’t a fix... may resort to pulling the dash bulb.
Emissions here in Colorado won’t test the car with warning lights on the dash.

Please help with some clear n precise photos!

Thanks in advance!




Sent from my iPhone using Tapatalk

[Steve Corbett]

I can get you a few pictures from my 89 325I if that will help.

[CharlieVu]

I can get you a few pictures from my 89 325I if that will help.

Please do! From where the wire harness starts all the way to the sensor.


Sent from my iPhone using Tapatalk

[Gregs///M]

Brake lining light in the cluster is extremely to fail either fully on or fully off. So even if you wire your brake lining sensors right and your light is still on, the cluster could be at fault. We fix all the time.