If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Well, it came in the mail and I was quite surprised. They werent kidding when they said it was a Big Boy. Here a comparison between the UUC piece and the factory one.
Yeah $20. That is too much but I had an extra $20 left over on my gift certificate (after purchase of an RKII Knob) and it was soon to expire. These can be made with some washers, nuts, and an M10 bolt.
UUC's clutch stop is designed for e36's and newer BMW's that used a horrible clutch pedal bushing layout that wears and creates alot of side to side slop in the pedal. This is why the head is so huge... so you dont sidestep the clutch stop due to the bushing slop.
UUC's clutch stop is designed for e36's and newer BMW's that used a horrible clutch pedal bushing layout that wears and creates alot of side to side slop in the pedal. This is why the head is so huge... so you dont sidestep the clutch stop due to the bushing slop.
Comment