Announcement

Collapse
No announcement yet.

89 325 with m50

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    89 325 with m50





















    1989 BMW E30 325I w/M50 swap
    Bronzit Coupe, Tan Interior
    H&R sport Springs, recent brake job, just rusty
    15x7 Mortegi traklites
    PAINT IS NOT FADED, OR OXIDZED, OR PEELING

    The swap is nearly done, a friend left the car, as he was transferred out of state for military stuff.
    The car when motor was pulled had 134,00 miles or so. ( I was told the ODO got rolled during gear changes?)
    And the m50 had around 140k or so.
    The owner worked in other states a lot, so it sat working, and running in his driveway for 2 years, then he got transferred, and i got it to store

    Swapped with a vanos m50 from an e36.
    Harness modified to go right into an e30
    260 getrag, with all proper linkage
    Booster holes were redrilled and pedal moved left about 1" to keep stock booster.

    I have very little free time to finish this for him, that is why its for sale

    Basics on what it needs:
    Fluids added, cooling system fully installed, and hose clamps put on, slave cylinder installed fully, dipstick installed, intake box and/or cone filter added. Interior needs a quick clean, and just various trim and small pieces screwed on. The M50 came from a running car. Bought from a tech at BMW Portland, he got a car with read end collision, and did the wiring for harness, Exhaust installed, fuel lines hooked up.

    I have plummed all the cooling, installed harness to motor, and put the intake, and TB on. It just needs say 20 hours of TLC and a little installation of some parts to work, I just don't have the time.

    CONS:
    Body is rough in spots, but no major quarter damage type stuff, rear valance needs to be pulled, and 1 fender could use re paint, small flaking near edge where bumper attached, driver seat has a split along bolster. Got a quote of 210$ to get it fixed.

    Not a bad canvass for someone on a budget, and not wanting to pay 10,000$ that some people are asking.


    Asking price is 4000$ OBO , but do not low ball those offers for 2500$ will not be considered, no trades. Cash only. Will need to be trailered away, due to the few parts not being hooked up. DISCOUNT FOR R3V MEMBERS, and YES IT WILL BE HEFTY


    I am sure I am missing stuff, but come look at it to see If it is something you might be interested in. Car is located in Kalama, WA.

    Ill grab better pics in the next hour or so

    I will add pics tonight.
    Last edited by Matt-B; 09-05-2017, 04:43 PM.


    Please leave feedback below, thanks

    http://www.r3vlimited.com/board/showthread.php?t=358170

    #2
    and I do mean discount. If you can prove your a r3v member, we can do 1 hell of a coupon


    Please leave feedback below, thanks

    http://www.r3vlimited.com/board/showthread.php?t=358170

    Comment


      #3
      new pics, and lowered price


      Please leave feedback below, thanks

      http://www.r3vlimited.com/board/showthread.php?t=358170

      Comment


        #4
        discounted


        Please leave feedback below, thanks

        http://www.r3vlimited.com/board/showthread.php?t=358170

        Comment


          #5
          markdown


          Please leave feedback below, thanks

          http://www.r3vlimited.com/board/showthread.php?t=358170

          Comment

          Working...
          X