If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
In no specific order:
- (1) the round metal nut that holds on the lower instrument cluster surround piece
- (3, maybe 4) metal clips that hold on the grill and headlight covers
- (1) interior door handle trim, I have one thats cracked and would like to replace it
- (1, maybe 2) Seat retracting handles
I included pics from realoem
those knurled nuts are little fuckers. why did they settle on that design... good luck...
~~~~~~~~~~~~~~~~~
'90 325i sedan daily driven
'85 325e coupe also a daily
those knurled nuts are little fuckers. why did they settle on that design... good luck...
After 18 or so years of e30 ownership I finally realized that the studs those "fuckers" screw on to tilt down. My use of foul language has dropped dramatically since
Seat Shocks....I have passed the baton to John Christy from Ninestitch. Email John or Garrett at ninestitch1@gmail.com
After 18 or so years of e30 ownership I finally realized that the studs those "fuckers" screw on to tilt down. My use of foul language has dropped dramatically since
When you install them just finger tighten them without any extra force. Then when removing them press the panel inward while turning the nut. That will relieve any pressure on the nut and it will back out freely without hassle.
Comment