Ok so i tried 3 different used(new to me) decks in my car the past 2 days, the first deck would come on when i hooked up the red +12v accessory wire and turned the key to accessory, unfortunately that deck had a bad rear speaker channel, next deck worked good but was old and ugly, Both of these decks i didnt even need to use the Yellow constant +12v wire and it would work and turn on and off fine with the key, so i got an alpine from a buddy
I ended up having to connect +12v accessory(red) and +12v constant unswitched(yellow) and the cars grey/violet wire all 3 together. This deck DOES NOT come on when i turn the key to accessory i have to manually turn the deck on and connecting all 3 wires was the ONLY way the deck would actually turn on, it turns off when i turn the key off,
so the problem is, the deck does not turn on when key is switched to ignition, the deck isnt saving my settings, and i have to manually turn the deck on everytime i start the car
Is the +12v accessory red wire circuit fried in the deck or did i do something wrong? im confused!!!
I ended up having to connect +12v accessory(red) and +12v constant unswitched(yellow) and the cars grey/violet wire all 3 together. This deck DOES NOT come on when i turn the key to accessory i have to manually turn the deck on and connecting all 3 wires was the ONLY way the deck would actually turn on, it turns off when i turn the key off,
so the problem is, the deck does not turn on when key is switched to ignition, the deck isnt saving my settings, and i have to manually turn the deck on everytime i start the car
Is the +12v accessory red wire circuit fried in the deck or did i do something wrong? im confused!!!
Comment