15" or 16" Wheels that Fit UUC BBK

[GThomas]

Wanted to bump this up to see if anyone has anymore 15" wheels they can confirm that fit.

[Shane Snyder]

Euroweaves and 16x7 BBS RS003's don't clear the caliper...

[JamesE30]

BUMP

Any new info on this? I just bought this kit and would love to know what other wheel options there might be. Though I am pleased to hear alpinas are possible!

[GThomas]

BUMP

Any new info on this? I just bought this kit and would love to know what other wheel options there might be. Though I am pleased to hear alpinas are possible!

kosei k4r 15x8 if u want light weight track wheels

[iilou23ii]

FYI 15 inch IX weaves do not fit spacer or no spacer. Had to sell mine and stick with d-forces.

[JamesE30]

So I've found out 2piece 15" Oz turbos won't fit without minimum 10mm spacer (maybe)

15x7 +12 Oz "alpinas" do fit according to a seller that tested the template for me.
I really hope he measured them right because I bought them! So ill post some pics when its all said and done..

[iilou23ii]

Anyone fit a set of 16 inch OZ Futuras? I really want those.

[GThomas]

Anyone fit a set of 16 inch OZ Futuras? I really want those.

Haven't personally tested these, but most 16" 3 piece wheel's bolts touch the caliper without using a large spacer.

[firemanory]

Slightly off topic, but any UUC BBK owners experience front clunking noises when going from reverse and then braking, and then forward and braking? Only does it once.

I have also noticed that the rotor hats have a small gap around the hub, which leads me to believe that it might be the rotor hat moving slightly and then contacting other side of rotor.

Anyone else have a gap around your rotor hat and hub assembly?

[iilou23ii]

15" or 16" Wheels that Fit UUC BBK

Will 17inch style 5's fit with a spacer?

[GThomas]

Will 17inch style 5's fit with a spacer?

I've tried a redrilled 17" Style 5 and its no where near close. You would need a 30-40mm spacer, thus making this wheel unusable with out some flairs.

[Link]

Interesting, hope to go to the kit when brakes are ready for replacing. Sub'd

[iilou23ii]

How about 17 in OZ futuras? Will they fit?

[JamesE30]

Well I mentioned this earlier in the thread. But now they are fitted i can say that OZ racing Type 146A (Commonly referred to as OZ Alpinas) will fit with a 3mm spacer. They are super close though, so you may want a 5mm but you 100% would need to roll your guards if lowered and using 205's.

They are 15x7, +12
Tyres are 205-50-15, TOYO R1R.
3mm spacer up front.

[Hawkmec]

I'm currently running Kosei k4R 15x8 et.20 with 205-55-15 and a 3mm spacer to clear the front strut. I tried MSW 15x7 et.22 and don't clear caliper it requiers a 15mm spacer at least to be safe.