Announcement

Collapse
No announcement yet.

FS '87 S50 swapped 325 Coupe

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    FS '87 S50 swapped 325 Coupe

    This car has been my project for the last three years, but I'm ready to move on to something new. It's an '87 325e with an s50 swap. The car is a blast to drive and has been very reliable. It passes emissions and has working a/c! Overall the car is in very good condition except for the paint. The interior is in great shape. The dash is cracked, but I have a perfect dash that I will include in the sale. I also have an extra set of style 5 wheels with adapters that I will include for my full asking price.

    Asking $8000 obo.

    Modifications:
    • s50 engine swap(unknown miles)
    • zf320 transmission
    • rebuilt 3.15 differential
    • obd2 exhaust manifolds into a 2.5" custom exhaust (magnaflow cat and vibrand resonator/muffler)
    • Riot Racing reground cams
    • Riot Racing big bore throttle body
    • 3.5" maf
    • 24lb injectors
    • Tune by RK-Tunes
    • Real Recaro LS "confetti" seats
    • UUC short shifter
    • UUC DSSR
    • ZHP shift knob
    • Momo mod 8 steering wheel
    • Oil pressure, oil temp and voltage gauges installed in the center console
    • BC coilovers
    • Suspension Techniques 22mm front sway bar
    • e36 m3 steering rack conversion using a rebuild rack
    • Custom stereo was installed last year. All new speakers, a 10" woofer driven by two kicker amps.
    • Plastic bumper conversion. The I had a body shop to modify the rear bumper to fit the early wheel arches.


    Maintenance: (all done within the last 3k miles)
    • All suspension bushings were replaced with new polyurethane bushings
    • All four wheel bearings were replaced
    • Both axles were replaced with new parts
    • Gauge cluster was rebuilt with new SI batteries and new odometer gears. All gauges work properly and the odometer is accurate.
    • Almost all components in the a/c system were replaced(lines, compressor, condenser and drier)
    • Rebuilt driveshaft
    • Brand new trim and turn signals in the bumpers
    • Rebuild VANOS
    • Idle control valve
    • Throttle position sensor
    • Cam position sensor
    • Crank position sensor
    • MAF


    Bad:
    Glove compartment handle broke off and I haven't gotten around to replacing it.
    One of the power steering hoses is leaking
    There is a vibration when accelerating slowly in 4th gear. I'm not sure if it's a transmission issue or something else int he driveline. I can demonstrate this is person, but the noise only happens in 4th and only under slow acceleration.











    Last edited by Eliminare; 04-09-2019, 05:17 PM.

    #2
    Bump for a good deal


    Sent from my iPhone using Tapatalk

    Comment


      #3
      Originally posted by ypresman View Post
      Bump for a good deal


      Sent from my iPhone using Tapatalk
      Thanks man.

      For those looking for a lower price, I'd would put the stock seats back in, and keep the extra parts that I have(wheels, dash, etc.) to make the car cheaper.

      Comment


        #4
        Bump.
        $8500 for the car with all of the parts that I have for it.
        $7500 for the car as it sits with no extra parts.
        Last edited by Eliminare; 03-31-2019, 07:01 PM.

        Comment


          #5
          bump

          Comment


            #6
            Bump.

            I replaced the clutch master cylinder and rubber line with a braided stainless hose this weekend. While I had the car up in the air, I loosened the driveshaft and shifted the center support bearing a bit. That helped the vibration significantly although it still happens.

            Comment


              #7
              bump

              Comment


                #8
                Is this still available?

                Comment


                  #9
                  Sorry, I forgot to update this thread. The car is sold.

                  Comment

                  Working...
                  X