So a long long time ago I bought a CM5908 and stuck it on a shelf. I am now trying to get it working as its in really good shape. However I do not have a code for it. I tried calling BMW and the first place I called gave me a code that did not work, second gave me an entirely different code, also did not work. And now everywhere else I call tells me I prolly just stole it.
My jumpers that are bridged are as follows.
TDC-0 - On
TDC-1 - On
TDC-2 - Off
TDC-3 - Off
TDC-4 - Off
TDC-5 - On
I then found this post... https://www.bimmerforums.com/forum/s...-5908)-89-735i
Which says to short pin 2 and then use the code 46334, however that didnt work either. I tried letting it sit on for an hour and that did nothing either.
For the record I soldered across the jumper for TDC-2. I can obviously undo this, but as of now I have not gotten anything to work.
Any suggestions?
My jumpers that are bridged are as follows.
TDC-0 - On
TDC-1 - On
TDC-2 - Off
TDC-3 - Off
TDC-4 - Off
TDC-5 - On
I then found this post... https://www.bimmerforums.com/forum/s...-5908)-89-735i
Which says to short pin 2 and then use the code 46334, however that didnt work either. I tried letting it sit on for an hour and that did nothing either.
For the record I soldered across the jumper for TDC-2. I can obviously undo this, but as of now I have not gotten anything to work.
Any suggestions?
Comment