Announcement

Collapse
No announcement yet.

I lost my tacho when switching to coils.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    ok hickok, i got a chance to do all this stuff.


    so, i have jumped j10 to ign just like ur pic.



    36 was actually going to pin 1 on the motronic, then 1 was jumped to 6. weird...
    i now put in a single wire going from 36 to 6 instead. That's done.


    i'm going off of this diagram




    #2 on motron is unused. Are you saying i need to do something with that?


    pins #1-5 on megasquert are unused.
    instead, the shield is connecting to #7 and crank signal is going to #25.

    i appreciate ur help keep it coming. i feel we're getting somewhere.


    Going by this right here.
    VR signal needs to be moved over to 1&2. let me know what u think d00d.
    and why is my current setup even working at all.

    Last edited by LowR3V'in; 07-25-2017, 03:05 PM.

    Comment


      #17
      Seems like the shield wire & black wire is going to the same pin.
      let me know guys. Does shield absolutly need to go to #2 and black need to go to #1.

      Vr sensor by jet jones, on Flickr

      Comment


        #18
        So me and Varg were talking it out over p.m.
        much was learned by me.

        the problem was the 'bip373' mod had to jump ign to ign out and that was the actual problem. tach is reading correctly now. i hope this can help someone else.

        see that little sucker jumping below the bip373?

        IgnJumper by jet jones, on Flickr

        Comment

        Working...
        X