The day has finally come, my dream wheels are mounted on the iX! They're 15x7 et35 OZ Rallys, so just a touch poked out from stock "iX weaves," but the same dimensions. Very 80s/90s rally - just my style.
I carefully measured the wheel center bore and it is about 59mm in diameter. The E30 center bore is 57.1mm, so they're less than 2mm different. However, above 65mph I get some pretty serious vibration (coming mostly from the front). Do I need hub centric rings? And if so, do they even make them that thin? Any help would be greatly appreciated!
I carefully measured the wheel center bore and it is about 59mm in diameter. The E30 center bore is 57.1mm, so they're less than 2mm different. However, above 65mph I get some pretty serious vibration (coming mostly from the front). Do I need hub centric rings? And if so, do they even make them that thin? Any help would be greatly appreciated!
Comment