What should i say, i just need a hobby too
No for real, when my father asked six-year-old me what car i wanted to drive when i was an adult, i pointed at a boxy looking - blue car, which you may have already guessed, was an E30.
Fast forward to my 24th birthday i already had 3 BMW's (all E46 pre fl) which i never kept for long (since they all had a lot issues, some i didn't want to fix)
So i started early 2018 in my garage to remove the engine out of my E46 Coupe and put it in my later on bought E30 316iA.
Let the pictures speak first:
As you can see, there's not much left of the original driveline
Now to the changes:
Receiving car :BMW E30 316iA (Automatic) from 1986 A sedan with 220tkm on the tach, was in good shape and cheap
Donor: BMW E46 328Ci Bj. 1999 that was cheap and rusty…
Engine: M52B28TU
Gearbox: ZF 5-Gear
Donor had also around 220tkm on the tach, gave the engine all the services and some modifications which are listed more down below.
Enginemounts: exhaust side BMW E36 enginemounts
intake side 24V enginemounts from (e30.de / 300mm.de)
enginebearings: 70mm enginemounts from E34 525i (with small offset)
gearboxmounts: BMW E30 325i
Gearboxbearings: driverside E30 316iA, the other side from E46 328Ci.
Exhaust: Team2Fast stainless steel exhaust system, covered in heatwrapping.
manifold: E36 manifolds.
proshaft: Mix of E36 328i and E30 316iA
Differential: E36 compact Differential 3.38
driveshafts: E36 compact left and right
rear axle: original E30 316iA, swings from E36 compact incl brakes.
brakediscs rear: E36 compact
brakecalipers rear: fromE36 328i (sedan)
shocks: ‚Bad Grip‘ sportshockabsorbers (i know the brand's name is not promising)
springs: shorter springs from FK for E30 60/40mm
hub front: Z3 hubs, with EPYTEC wheelhub Adapter
brakediscs front: 292mm BREMBO
brakecalipers rear: E36 328i, slightly moddified carrier with adapters from (e30.de / 300mm.de)
wishboners: Meyle HD
flybar: Meyle HD
camberplates: Uniball Camberplates Silver-Project PL
strutbrace front/rear: Drift King
wiring loom adapter: Adapter M52TU → E30 from Bruno Antunes
brakebooster.: E34 525i Tandembrakebooster
Tach: E30 325i (Codplug 6 Zylinder, Tankvolume 55l)
Pedals: E30 manual gearbox Pedals inkl clutch master
steering wheel: E28 3-spoke
gearboxlinkage: shortshifter from wish, linkage from donor
seats: Sportseats Design Edition Daytona violett
intake manifold: M54B30 with DISA and KGE
rims: remotec's 8x16 ET35
spacers: SCC 30mm per axle
wheels: front = 205/50/16 Toyo Proxes T1R; rear = 225/50/16 Yokohama Advan Neova AD08
antenna: automatic
radio: Becker mexico CD pro
seatbelt:red one
electronics: working
faultcodes: still alot
Drives like a charm
>First time it ran with exhaust fitted<
>first time it drove<
There's still some work to do so i'll make sure to keep you updated.
No for real, when my father asked six-year-old me what car i wanted to drive when i was an adult, i pointed at a boxy looking - blue car, which you may have already guessed, was an E30.
Fast forward to my 24th birthday i already had 3 BMW's (all E46 pre fl) which i never kept for long (since they all had a lot issues, some i didn't want to fix)
So i started early 2018 in my garage to remove the engine out of my E46 Coupe and put it in my later on bought E30 316iA.
Let the pictures speak first:
As you can see, there's not much left of the original driveline
Now to the changes:
Receiving car :BMW E30 316iA (Automatic) from 1986 A sedan with 220tkm on the tach, was in good shape and cheap
Donor: BMW E46 328Ci Bj. 1999 that was cheap and rusty…
Engine: M52B28TU
Gearbox: ZF 5-Gear
Donor had also around 220tkm on the tach, gave the engine all the services and some modifications which are listed more down below.
Enginemounts: exhaust side BMW E36 enginemounts
intake side 24V enginemounts from (e30.de / 300mm.de)
enginebearings: 70mm enginemounts from E34 525i (with small offset)
gearboxmounts: BMW E30 325i
Gearboxbearings: driverside E30 316iA, the other side from E46 328Ci.
Exhaust: Team2Fast stainless steel exhaust system, covered in heatwrapping.
manifold: E36 manifolds.
proshaft: Mix of E36 328i and E30 316iA
Differential: E36 compact Differential 3.38
driveshafts: E36 compact left and right
rear axle: original E30 316iA, swings from E36 compact incl brakes.
brakediscs rear: E36 compact
brakecalipers rear: fromE36 328i (sedan)
shocks: ‚Bad Grip‘ sportshockabsorbers (i know the brand's name is not promising)
springs: shorter springs from FK for E30 60/40mm
hub front: Z3 hubs, with EPYTEC wheelhub Adapter
brakediscs front: 292mm BREMBO
brakecalipers rear: E36 328i, slightly moddified carrier with adapters from (e30.de / 300mm.de)
wishboners: Meyle HD
flybar: Meyle HD
camberplates: Uniball Camberplates Silver-Project PL
strutbrace front/rear: Drift King
wiring loom adapter: Adapter M52TU → E30 from Bruno Antunes
brakebooster.: E34 525i Tandembrakebooster
Tach: E30 325i (Codplug 6 Zylinder, Tankvolume 55l)
Pedals: E30 manual gearbox Pedals inkl clutch master
steering wheel: E28 3-spoke
gearboxlinkage: shortshifter from wish, linkage from donor
seats: Sportseats Design Edition Daytona violett
intake manifold: M54B30 with DISA and KGE
rims: remotec's 8x16 ET35
spacers: SCC 30mm per axle
wheels: front = 205/50/16 Toyo Proxes T1R; rear = 225/50/16 Yokohama Advan Neova AD08
antenna: automatic
radio: Becker mexico CD pro
seatbelt:red one
electronics: working
faultcodes: still alot
Drives like a charm
>First time it ran with exhaust fitted<
>first time it drove<
There's still some work to do so i'll make sure to keep you updated.
Comment