Announcement

Collapse
No announcement yet.

No spark to plugs

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    No spark to plugs

    Hi, I have a 1987 325e and having trouble with the spark, I have replaced the spark plugs, distributor cap and rotor, ignition coil, and the main relay, my spark plugs wires are good and fuel is there but still getting no spark to the plugs

    #2
    Same with me on my 86' eta . Next I'm going to check the flywheel reference sensor (just a metal nub on the wheel) , which can break off. Also suspecting that one of the two bellhousing sejsor plugs may be done for........

    Sent from my BNTV400 using Tapatalk

    Comment


      #3
      This thread is about 6 months old. If the OP is still around did you get this issue fixed? A bad crank position sensor will give you a no spark situation

      Comment

      Working...
      X