Announcement

Collapse
No announcement yet.

Carbon Fiber strut bar

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    Originally posted by Matt-B View Post
    prove it, and im assuming most wont go for 450$ when you can get a garagistic/sparco 1 for 100$
    We can definitely provide proof of testing, we use one of the highest quality resins in the industry which is rated for a constant use at 350 degrees Fahrenheit.

    As a comparison, steel has a tensile modulus of about 29 million psi (200 million kPa). Thus, carbon fibers are ten times stronger than steel and eight times that of aluminum, not to mention much lighter than both materials, 5 and 1.5 times, respective to the type of carbon fiber used.

    Comment


      #17
      Originally posted by ProjectEvolution View Post

      As a comparison, steel has a tensile modulus of about 29 million psi (200 million kPa). Thus, carbon fibers are ten times stronger than steel and eight times that of aluminum, not to mention much lighter than both materials, 5 and 1.5 times, respective to the type of carbon fiber used.
      Hey you should cite sources that are published when you're quoting them word for word.
      It shows you understand professional conventions and ethical responsibilities aka respect and more importantly trust since you're trying to start a business.


      1991 325iS turbo

      Comment


        #18
        Well it's safe to say that I'm highly aroused. These look REALLY good
        @BaggedMW

        Comment


          #19
          will this work with an s54 swapped e30m3?

          Comment


            #20
            Originally posted by ak- View Post
            Hey you should cite sources that are published when you're quoting them word for word.
            It shows you understand professional conventions and ethical responsibilities aka respect and more importantly trust since you're trying to start a business.

            http://ifsa.my/articles/carbon-fiber...-of-the-future
            Your right, my apologies for not sourcing earlier, only had a few minutes at the time and must have forgotten

            Comment


              #21
              Originally posted by prada88m3 View Post
              will this work with an s54 swapped e30m3?
              will do proper testing

              Comment


                #22
                I'm def interested in 2!

                Sent from my SAMSUNG-SM-N920A using Tapatalk

                Comment


                  #23
                  i'm potentially interested but it depends how well it hugs the hood and how high it sits in relation to the shock tower so that it clears the airbox with the RHD itb kit. the racing dynamics one sits above the shock tower at the ends which is good for clearance not great for effectiveness of the struct bar though lol

                  btw tensile modulus has nothing to do with strength, it tells you the "stiffness" of the material
                  89 E30 325is Lachs Silber - currently M20B31, M20B33 in the works, stroked to the hilt...

                  new build thread http://www.r3vlimited.com/board/showthread.php?t=317505

                  Comment


                    #24
                    I just skeptical. 4 posts and selling a 450$ bar.

                    i mean if its worth it to some people. most of us are on a budget here, and companies for get that sometimes


                    Please leave feedback below, thanks

                    http://www.r3vlimited.com/board/showthread.php?t=358170

                    Comment


                      #25
                      Originally posted by ProjectEvolution View Post
                      Your right, my apologies for not sourcing earlier, only had a few minutes at the time and must have forgotten


                      Busy to the gills with real literal shop work, no doubt?


                      Sent from my iPhone using Tapatalk Pro
                      Derek-

                      Comment


                        #26
                        Originally posted by prada88m3 View Post
                        will this work with an s54 swapped e30m3?
                        Yes it will fit, changed the design to a three piece strut tower brace, here are the final specs:

                        made in USA
                        Specs:-3K 2X2 Twill weave exterior (your choice of weave flow direction or “V” weave with Biaxial +45/-45 Degree 24K core Carbon Fiber, core carbon fiber is made using H2550 carbon and Nomex for added stiffness and weight reduction.
                        -Infused using High Impact/High Temp Epoxy rated and tested for 350 degrees constant use.
                        - Mounts are made using Biaxle +45/-45 Degree 24K Carbon Fiber
                        - it is clear coated and UV protected with our standard quality high temp clear/UV protection, can upgrade to the one and only reputable WetWet Coat with UV protection for +$50
                        - build time is 2 weeks
                        - honeycomb pattern carbon fiber exterior available for +$50
                        - Lifetime defect warranty, must be installed by us or a professional shop, installation as a “DIY” or similar will void the lifetime defect warranty entirely. Damages occurring due to poor installment is not covered within the manufacturing defect warranty. Warranty is non transferable
                        - Installation charge by us is $40
                        -FIRST 10 ORDERS GET LIFETIME ON DIY AND RAISED CARBON FIBER LETTERING instructions included on installation.

                        Payments can be made through google wallet@ projectevolutioncars@gmail.com

                        after payment, private message me with you name, email, and phone number for invoicing and receipt , we are located in Gainesville GA
                        Last edited by ProjectEvolution; 10-19-2017, 06:09 AM.

                        Comment


                          #27
                          Originally posted by ProjectEvolution View Post
                          Yes it will fit, changed the design to a three piece strut tower brace, here are the final specs:

                          made in USA
                          Specs:-3K 2X2 Twill weave exterior (your choice of weave flow direction or “V” weave with Biaxial +45/-45 Degree 24K core Carbon Fiber, core carbon fiber is made using H2550 carbon and Nomex for added stiffness and weight reduction.
                          -Infused using High Impact/High Temp Epoxy rated and tested for 350 degrees constant use.
                          - Mounts are made using Biaxle +45/-45 Degree 24K Carbon Fiber
                          - it is clear coated and UV protected with our standard quality high temp clear/UV protection, can upgrade to the one and only reputable WetWet Coat with UV protection for +$50
                          - build time is 2 weeks
                          - honeycomb pattern carbon fiber exterior available for +$50
                          - Lifetime defect warranty, must be installed by us or a professional shop, installation as a “DIY” or similar will void the lifetime defect warranty entirely. Damages occurring due to poor installment is not covered within the manufacturing defect warranty. Warranty is non transferable
                          - Installation charge by us is $40
                          -FIRST 10 ORDERS GET LIFETIME ON DIY AND RAISED CARBON FIBER LETTERING instructions included on installation.

                          Payments can be made through google wallet@ projectevolutioncars@gmail.com

                          after payment, private message me with you name, email, and phone number for invoicing and receipt , we are located in Gainesville GA
                          any company that doesnt at least have paypal raises a red flag. in addition to the lack of posts and format of posts/responses/copypasta. might help to get a member local to come check you out for some credibility

                          Comment


                            #28
                            Originally posted by Sladek View Post
                            any company that doesnt at least have paypal raises a red flag. in addition to the lack of posts and format of posts/responses/copypasta. might help to get a member local to come check you out for some credibility
                            Our website is currently in development, will be up and running in 2 days or less.

                            We do have Paypal, we can send a Paypal invoice via email with a 2.9% Paypal processing fee
                            Last edited by ProjectEvolution; 10-26-2017, 11:13 AM.

                            Comment


                              #29
                              These look pretty sweet
                              Hank Ahrens
                              1984 Alpine Coupe
                              1978 911sc

                              Comment


                                #30
                                Originally posted by ahrensNW View Post
                                These look pretty sweet
                                where are the pics?
                                89 E30 325is Lachs Silber - currently M20B31, M20B33 in the works, stroked to the hilt...

                                new build thread http://www.r3vlimited.com/board/showthread.php?t=317505

                                Comment

                                Working...
                                X