If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I've read somewhere that you can't roll e30 rear fenders
Yes and no. Yes you can roll the fenders but no you can not roll late model rears flat. At least not with out some pre prep. What you need to do is chisel or wire wheel all the undercoat thats on the inside of the lip before you roll the fenders. Makes all the difference in the world. Also the late model inner fender has a little bump on it. You have to carefully tap it flat. If you tap to much or too hard you'll mess up the quarter panel. One of the benefits of an early model is now thick under coat or bump.
Tucking tire on an early model high arch car with 215/40's :)
Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.
Comment