M20 Turbo header pic

[Good & Tight]

Almost complete just need to weld the flange and test fit in the car. What do you guys think? It's made from 16 guage header pipe.



Just made it for fun prolly just going to ebay it and see what I get.

[Jand3rson]

Clean it up and paint it, and you'll make a fortune.

[Jordan]

Poor anglular transitions. Grouping at the flange is um.. not pretty at all.

[MR 325]

Great work for DIY

Keep us updated

[Good & Tight]

Here's some pics with a T4 and T3/T4. It fits right in without having to remove the A/C.




This the first attempt on making one for the six.


I have one more to make hopefully it will come out better.
Thanks for the replies everyone.

[asubimmer]

you don't make one for a m42 do ya? I was planning on doing mine but I have to wait till summer to have time to fab one...so if you have them for a m42 then I can put my garrett t3 on sooner :twisted:

[PJ]

The collector can be made 99% better and nicer, and i don't like the bend on #4 cyl.

Exept that i think it's okay, and would work okay on a engine using a turbo that will spool no mather what, eg. T3.

Perhaps you could take som inspiration and ideas from this mainfold, for your next one. ( They only get better with time, like whiskey :P )

[Good & Tight]

The collector can be made 99% better and nicer, and i don't like the bend on #4 cyl.

Exept that i think it's okay, and would work okay on a engine using a turbo that will spool no mather what, eg. T3.

Perhaps you could take som inspiration and ideas from this mainfold, for your next one. ( They only get better with time, like whiskey :P )

Yes I agree Peppe and have looked at your manifold quite a few times and the first one you had on for the HX40, also seen a few on PPF website.
I made these for fun and to get better at welding. The next one I will make the collector first then work around that.
Here's the last one with 1200 degree paint.

[PJ]

Improvement! Excause my english, im swede.


- Well, don't stare atm my first mainfold that i bought cause that sheit did not fitt in the car att all, and it was absolutley junk.

I like your ideas about the collector! Start there and then work your way down.

[E304life]

I like it.