Announcement

Collapse
No announcement yet.

BMW Dyno Day.. Stratford, CT

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    BMW Dyno Day.. Stratford, CT

    Updated Information!!!!! Here is a link to all the info and directions. www.666fab.com/dynoday

    When: Saturday June 3 2006 9:00 AM to 4:00 PM (Important!! Anyone planning to dyno an all wheel drive car must do so between 9:00-10:00AM. This is to keep things moving throughout the day and prevent down time for dyno setup changes.

    What: You will receive 3 dyno pulls on for the cost of $65/ 2wd vehicles or $75/ AWD vehicles (please see above note about AWD cars) complete with Air/Fuel readings and a dynochart printout. This is primarily a BMW event but other makes/models are welcome.

    Where: European Performance Labs located in Stratford, CT. For more information about the facility and the mustang dyno please visit www.eplabs.net


    Directions:
    From Hartford & the North:
    Take I-91 South to Exit 17 for Rt-15 (Wilbur Cross / Merrit Parkway)
    Follow Rt-15 to Exit 54 (this is the 95 connector in Milford)
    Follow the connector to I-95 South
    Follow I-95 South to Exit 30 for Surf Ave (& Rt 113)
    Turn Left onto Surf Ave [Go 0.2 mi]
    Turn Left onto Lordship Blvd [Go 0.6 mi]
    Turn Left onto Woodend Rd and arrive at #726 [0.5 mi]

    From New York & the West:
    Take I-95 North to Exit 30 for Lordship Blvd (& Rt 113)
    Turn Right onto Lordship Blvd [Go 0.7 mi]
    Turn Left onto Woodend Rd and arrive at #726 [0.5 mi]

    From New Haven & the East:
    Take I-95 South to Exit 30 for Surf Ave (& Rt 113)
    Turn Left onto Surf Ave
    Turn Left onto Lordship Blvd
    Turn Left onto Woodend and arrive at #726 [0.5 mi]
    Last edited by jon volk; 05-11-2006, 07:08 AM.
    '92 MTech cabrio: Tesla P85 powered

    IG: telsa_bimmer

    '95 Alpine M3 5.3 LS, Precision 7675, TH400/Gear Vendors OD
    10.4@136 pump gas at 3530lbs. (SOLD)

    #2
    Im interested, pending on price, and what not... and if its defienetely on a weekend.

    Did you post this up on bimmerforums, or e30 tech, or s14.net?

    Comment


      #3
      see first post
      Last edited by jon volk; 05-11-2006, 07:03 AM.
      '92 MTech cabrio: Tesla P85 powered

      IG: telsa_bimmer

      '95 Alpine M3 5.3 LS, Precision 7675, TH400/Gear Vendors OD
      10.4@136 pump gas at 3530lbs. (SOLD)

      Comment


        #4
        see first post
        Last edited by jon volk; 05-11-2006, 07:03 AM.
        '92 MTech cabrio: Tesla P85 powered

        IG: telsa_bimmer

        '95 Alpine M3 5.3 LS, Precision 7675, TH400/Gear Vendors OD
        10.4@136 pump gas at 3530lbs. (SOLD)

        Comment


          #5
          dyno.....

          JV.....
          sent u a PM....

          Im interested and maybe 1 or 2 friends.......325i and 968. I also have a 325i. Will u be maxing allowed people to prevent an all day thing?
          I love sitting down and just driving!

          Comment


            #6
            It will probably end up being an all day thing anyway. Theres a decent amount of parking so there shouldnt be any problems. I will also have some manifolds and such on display for anyone that wants to see my work in person.
            '92 MTech cabrio: Tesla P85 powered

            IG: telsa_bimmer

            '95 Alpine M3 5.3 LS, Precision 7675, TH400/Gear Vendors OD
            10.4@136 pump gas at 3530lbs. (SOLD)

            Comment


              #7
              666

              I can be more definite by Wed eve....its about my other commitments unfortunately. I have checked out the 666 site.....great stuff. Are you one of the owners/fabricators?........
              I love sitting down and just driving!

              Comment


                #8
                I would be down for that. Can I bring a few Subies with me?
                Follow me @baysidefabrication on Instagram

                Comment


                  #9
                  Sure, other makes are welcomed but Id like to see alot of bimmers ;)
                  '92 MTech cabrio: Tesla P85 powered

                  IG: telsa_bimmer

                  '95 Alpine M3 5.3 LS, Precision 7675, TH400/Gear Vendors OD
                  10.4@136 pump gas at 3530lbs. (SOLD)

                  Comment


                    #10
                    Originally posted by JoelRKaplan
                    I can be more definite by Wed eve....its about my other commitments unfortunately. I have checked out the 666 site.....great stuff. Are you one of the owners/fabricators?........
                    Thanks for the kind words... to answer your question, both, Im a one-man show at the moment. I do it b/c I love forced induction bimmers and found the market here in the states rather lacking for guys who want to buy off the shelf hardware for making big power.
                    '92 MTech cabrio: Tesla P85 powered

                    IG: telsa_bimmer

                    '95 Alpine M3 5.3 LS, Precision 7675, TH400/Gear Vendors OD
                    10.4@136 pump gas at 3530lbs. (SOLD)

                    Comment


                      #11
                      Im pretty interested so I can get a baseline for anything else I do down the road. Count me in.
                      Back to my roots

                      Comment


                        #12
                        June 3 is now confirmed.
                        '92 MTech cabrio: Tesla P85 powered

                        IG: telsa_bimmer

                        '95 Alpine M3 5.3 LS, Precision 7675, TH400/Gear Vendors OD
                        10.4@136 pump gas at 3530lbs. (SOLD)

                        Comment


                          #13
                          Good to hear that it is confirmed...

                          Bump, there must be some more NE interest!!!

                          Comment


                            #14
                            wideband a/f is included as well. ;)
                            '92 MTech cabrio: Tesla P85 powered

                            IG: telsa_bimmer

                            '95 Alpine M3 5.3 LS, Precision 7675, TH400/Gear Vendors OD
                            10.4@136 pump gas at 3530lbs. (SOLD)

                            Comment


                              #15
                              I'll be there for sure. I am really interested to see what the m50's throwin down.
                              Follow me @baysidefabrication on Instagram

                              Comment

                              Working...
                              X