Announcement

Collapse
No announcement yet.

Poly subframe subframe bushing slop

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Poly subframe subframe bushing slop

    Picked up some Garigastic poly subframe bushings and there is some slop in the brand new bushing between the inner sleeve and bushing. My old AKG bushings where a tight fit with the bushing and inner sleeve.

    Is this a problem?

    #2
    Depends on how much. Are we talking hotdog down a hallway or a loose slip fit? If you have a pair of calipers, measure the bushing and bore. I would think anything more than .020" difference in diameter would be too much, but that's just a gut estimate. The bushing might swell when the assembly is tightened up.

    Comment

    Working...
    X