Announcement

Collapse
No announcement yet.

Manual Top Tonneau Cover Release Handle not working

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Manual Top Tonneau Cover Release Handle not working

    Anyone know how I might be able to open the tonneau cover without using the handle in the rear quarter behind the driver seat? When I pull the release handle, there is resistance, but the tonneau won't release & pop-up.

    Probably a screw is loose or a latch needs lube. Would I be able to open it from the trunk or behind the interior panel somehow?

    Searches have turned up nada.

    Thanks!
    R135 /// 1990 Alpinweiß II 325is
    └┼┼┘ /// 1993 Black/Black Convertible (sold)
    ..24

    #2
    You gotta run your fingers under the cover and push that lever to fully release the cover, kind of like a hood latch release on a regular car.

    Sent from my VS985 4G using Tapatalk

    Comment


      #3
      Solved. I just had to tap on the cover a little bit while pulling up on it. It eventually popped loose. Sprayed from lithium grease on the latches, and it works great now.
      R135 /// 1990 Alpinweiß II 325is
      └┼┼┘ /// 1993 Black/Black Convertible (sold)
      ..24

      Comment


        #4
        I seem to be facing the same problem, I pull on the latch behind the driver's seat and nothing. I'm worried if I pull any harder I'll break it right off. Can you elaborate on how you solved the problem?

        Greatly appreciated,

        PTUH

        Comment


          #5
          Does the handle move or is it stuck?
          drvn2wn

          Comment


            #6
            The handle moves but nothing is unlocking or moving... any help?

            Comment


              #7
              Can you hear any movement of the wires?

              Comment

              Working...
              X