Announcement

Collapse
No announcement yet.

analog clock install

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    Originally posted by bwanac View Post
    anyone have a part# or picture of this female power mirror plug?
    I could'nt find a part number on this but if you have an e30 just open the mirror cover (tweeter cover) and unplug your mirror and you'll see it. If you don't have one ill post a pic 2marrow.
    harry/harout

    Comment


      #17
      who ever reads this and wants to do the swap, make it easy on yourself and just disconnect the battery, cause its alot easier then pulling the cluster, when you short it and have to rewire stuff

      Comment


        #18
        I wanted to thank bmw325csi I just did the analog clock install and it worked perfectly. I went to the wreckers and found the part no problem, all I had to do to the part was cut the xtra bits off and it fit.

        Crispy.

        PS disconnect the battery before doing anything.
        Last edited by Crispy; 03-14-2008, 02:17 PM.

        Comment


          #19
          your welcome. Glad it worked out for you
          harry/harout

          Comment


            #20
            ..
            mirror connector on the left, oem clock one on the right,
            after you snip the tabs off it fits right in
            ..
            Attached Files
            Last edited by ScentOfGasoline; 01-18-2013, 04:55 PM.

            Comment


              #21
              I just installed an analog clock last night, whole lot easier when you're just replacing a digital clock with it, the wiring is the same. :p

              Comment


                #22
                Is it the same when installing from a 13 button obc harness?


                Comment


                  #23
                  Anybod tried this with a 13 button OBC harness?


                  Comment


                    #24
                    ^Sure, just grab a volt meter and find the 4 wires you need, then just tape off the rest.
                    harry/harout

                    Comment


                      #25
                      PM sent..


                      Comment


                        #26
                        Thank you BMW325csi. Wired everything up and tried out a spare digital clock I had. Worked perfectly..


                        Comment


                          #27
                          I just picked one up, but the + button seems to be broke. It doesn't click when pressed like the - button. Anyway, it hasn't been wired in yet, but does anyone know if one of the buttons is broke, can you still set the clock just using the other button?
                          sigpic
                          January 2012 COTM

                          Comment


                            #28
                            Originally posted by robrez View Post
                            I just picked one up, but the + button seems to be broke. It doesn't click when pressed like the - button. Anyway, it hasn't been wired in yet, but does anyone know if one of the buttons is broke, can you still set the clock just using the other button?
                            Mines the same way. Someone with a fat fingers pressed it and broke it. Just set it with the - button.

                            1992 BMW 325iC
                            1978 Chevrolet Monte Carlo
                            1965 Chevrolet Corvair Monza 140hp

                            Comment


                              #29
                              Send it to me, I'll fix it for you. HAHAHAH


                              Comment


                                #30
                                Does anybody know if a 6 button obc has a bracket that will hook up to the analog clock?


                                Comment

                                Working...
                                X