These are laser cut acrylic gauge panels precisely cut to the opening of the OBC location on E30's. The panel was able to be so accurately cut that it nearly snap fits into the location with only a little bit of superglue or other adhesive necessary to hold it in place.
Gauge panel is offered in 3 sizes, and there are limited quantities of each size, so hurry while they last.
2" / 50mm- for some autometer gauges like the ultralight series etc.
2-1/16" / 55mm- Most sunpro and many autometer gauges are this size (most common gauge size)
2-5/8" / 66mm- Standard size for plus size gauges offered by autometer and others.
If you have a caliper, measuer the diameter of the gauge closest to the bezel.
If you don't have a caliper, wrap a strand of string around gauge, and take that measurement, and do the following math:
(Measurement of string) divided by 3.14= Gauge Diameter
12$ shipped (priority mail) per gauge panel and 8$ for each extra.
add 2$ per panel for textured black coating that matches the interiors black plastic almost perfectly.
PM me if interested, and I will give you payment information on request. Specify # of panels wanted, and if you want the textured coating.
-Gauge panels come with a paper backing to protect the side you'd face out (If you choose to leave it white (which is slightly translucent)
-Guaranteed to fit perfectly.
Sorry there isn't a closer picture installed. I no longer own the car that the panel is installed in, and that is the best picture I have of it installed. Hopefully I'll get a closeup soon.
Gauge panel is offered in 3 sizes, and there are limited quantities of each size, so hurry while they last.
2" / 50mm- for some autometer gauges like the ultralight series etc.
2-1/16" / 55mm- Most sunpro and many autometer gauges are this size (most common gauge size)
2-5/8" / 66mm- Standard size for plus size gauges offered by autometer and others.
If you have a caliper, measuer the diameter of the gauge closest to the bezel.
If you don't have a caliper, wrap a strand of string around gauge, and take that measurement, and do the following math:
(Measurement of string) divided by 3.14= Gauge Diameter
12$ shipped (priority mail) per gauge panel and 8$ for each extra.
add 2$ per panel for textured black coating that matches the interiors black plastic almost perfectly.
PM me if interested, and I will give you payment information on request. Specify # of panels wanted, and if you want the textured coating.
-Gauge panels come with a paper backing to protect the side you'd face out (If you choose to leave it white (which is slightly translucent)
-Guaranteed to fit perfectly.
Sorry there isn't a closer picture installed. I no longer own the car that the panel is installed in, and that is the best picture I have of it installed. Hopefully I'll get a closeup soon.
Comment