NoVA: Parting out '88 325is w/M50 swap

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • pr0craztinazn
    Wrencher
    • Aug 2009
    • 204

    #1

    NoVA: Parting out '88 325is w/M50 swap

    The chassis has been scrapped, but it had 229k on it; the M50 has a little over 180k on it. It has a new water pump, thermostat, and hoses as of August 2010. The only things you would need if you purchase this would be an exhaust, radiator, brake booster, and E28 engine mounts (this swap has been together for over 4 years; the engine mounts show signs of wear and should be replaced). It is being parted because it was involved in a front end collision, hence your need for a radiator.

    With the plug & play harness, 405 ECU, long block, cooling system hoses, MAF, E36 mount arms, & E34 oil pan + dipstick, SOLD SOLD SOLD


    I've also got a ZF transmission with a 328i drive shaft; the drive shaft could use a new guibo, but the center support bearing is fine. Included would be the clutch, flywheel, shifter linkage, and starter; asking $600 for that.

    3.73 LSD: $150; $230 shipped in the lower 48

    It has an anthracite leather sport interior; the sport seats are worn but are ready to be restored. The door cards are in pretty good shape.

    Gray or Anthracite Door cards: $60





    Premium rear speakers: $20
    Door panel tweeters: $20
    All the speakers: $30

    Side view mirrors: SOLD
    iS spoiler: $40



    Left side headlight bucket w/US market Hella ellipsoid & high beams with functional adjusters: $75 shipped in the lower 48


    Ireland Engineering fender flares: $80 for all four
    Two are broken from the wreck this car was in, but they are repairable if you have time and skills.


    If it's not listed, it's not for sale... the chassis that these parts came from is long gone.
    Last edited by pr0craztinazn; 12-10-2010, 12:59 PM.
  • kpeng
    E30 Addict
    • Jun 2010
    • 441

    #2
    Are the sideskirts any good?

    Comment

    • McGyver
      R3V Elite
      • Jun 2009
      • 4437

      #3
      pm me if you have weaves. i would trade you caps + cash if you need the car movable. and if i was driving up for a weave, i might want the radio if it works. also, hows the dash?
      sigpic
      1987 - 325i Convertible Delphin Auto [SOLD], 325i Convertible Delphin Manual [SOLD]
      1989 - 325i Convertible Bronzit m30b35 swapped [SCRAPPED], 325i Sedan Alpine Auto[DD]
      1991 - 325i Coupe Laguna Manual [Project], 535i Sedan Alpine [SCRAPPED]

      Comment

      • bataangpinoy
        E30 Mastermind
        • Jul 2008
        • 1636

        #4
        pm'd
        My feedback:
        http://www.r3vlimited.com/board/showthread.php?t=186328

        http://e30tech.com/forum/showthread.php?t=74911

        Instagram:
        @gears_n_glory

        @functionmotorsports

        Comment

        • mkcman17
          R3V OG
          • Jul 2010
          • 8240

          #5
          dibs on the oilpan!!




          i yoke, i yoke. glws.
          1989 325is / 2.7, 274 cam, e30 M3 5-lug
          1989 LN106 Hilux / 3.0TD SFA
          1974 2002tii / stock
          2002 IS300 / 5spd LSD

          Comment

          • greyis89
            Wrencher
            • Jun 2009
            • 230

            #6
            Pm me with some more details on the tranny package. Quite interested.
            sigpic

            Comment

            • pr0craztinazn
              Wrencher
              • Aug 2009
              • 204

              #7
              Originally posted by kpeng
              Are the sideskirts any good?
              Nope, sorry.

              Originally posted by McGyver
              pm me if you have weaves. i would trade you caps + cash if you need the car movable. and if i was driving up for a weave, i might want the radio if it works. also, hows the dash?
              The dash is cracked; the radio isn't up for sale.

              Originally posted by greyis89
              Pm me with some more details on the tranny package. Quite interested.
              You'll have a PM shortly.

              I have a fair amount of interest for the M50; whomever pays for it in full or gives me a non-refundable deposit and a ballpark date to pick it up will end up getting it.

              The chassis will be sent to the recycler on Saturday, so if there are any random parts you're interested in, ask now!
              Last edited by pr0craztinazn; 10-07-2010, 01:58 PM.

              Comment

              • McGyver
                R3V Elite
                • Jun 2009
                • 4437

                #8
                and the weaves?
                sigpic
                1987 - 325i Convertible Delphin Auto [SOLD], 325i Convertible Delphin Manual [SOLD]
                1989 - 325i Convertible Bronzit m30b35 swapped [SCRAPPED], 325i Sedan Alpine Auto[DD]
                1991 - 325i Coupe Laguna Manual [Project], 535i Sedan Alpine [SCRAPPED]

                Comment

                • pr0craztinazn
                  Wrencher
                  • Aug 2009
                  • 204

                  #9
                  There's only one weave... If you want it that badly, I'd trade it for a bottle cap + $10.

                  Comment

                  • McGyver
                    R3V Elite
                    • Jun 2009
                    • 4437

                    #10
                    can i get a pic? (i have 3 weaves and badly need new tires, but dont want to get them till i have a full set.)
                    sigpic
                    1987 - 325i Convertible Delphin Auto [SOLD], 325i Convertible Delphin Manual [SOLD]
                    1989 - 325i Convertible Bronzit m30b35 swapped [SCRAPPED], 325i Sedan Alpine Auto[DD]
                    1991 - 325i Coupe Laguna Manual [Project], 535i Sedan Alpine [SCRAPPED]

                    Comment

                    • TheRooster
                      Advanced Member
                      • Jan 2010
                      • 168

                      #11
                      if you part out the motor let me know

                      Comment

                      • CincinnatiKid
                        Mod Crazy
                        • Nov 2007
                        • 716

                        #12
                        how much for the diff shipped?
                        1990 S50 goodness.

                        Comment

                        • pr0craztinazn
                          Wrencher
                          • Aug 2009
                          • 204

                          #13
                          Originally posted by McGyver
                          can i get a pic? (i have 3 weaves and badly need new tires, but dont want to get them till i have a full set.)


                          Originally posted by CincinnatiKid
                          how much for the diff shipped?
                          Need a zip code for a quote. Also need to purchase a large bin for the diff to fit in since boxes rated for the weight of the diff are not cheap.

                          Comment

                          • pr0craztinazn
                            Wrencher
                            • Aug 2009
                            • 204

                            #14
                            The chassis is now off to the scrapyard; if it's not mentioned in the thread, it's not for sale.

                            Comment

                            • pr0craztinazn
                              Wrencher
                              • Aug 2009
                              • 204

                              #15
                              Prices dropped; I will be getting pictures soon of the i oil cooler w/filter housing, eta AFMs with air boxes, & the ECUs (173, Mark D chipped 027, BMW remanufactured 027, and a factory original '87 027) I have.

                              If you want the basketweave, its $35 or trade a bottle cap & $10.
                              Last edited by pr0craztinazn; 11-30-2010, 12:59 PM.

                              Comment

                              Working...