Hey again!
These mostly speak for themselves, perfect for someone who wants some HD axles but does not want to break the bank. Ive run these on my 400hp drift car for awhile now (with 225/235 width sticky tires) countless launches and clutch kicks later and they're still as good as the day i installed them.
USA made!! Right in house
New Unit Not rebuilt.
No Core
Mounting hardware not included
We do not guarantee HP or TQ numbers. We have tried 500HP and some on more.
These are 4340 Chromoly
4340 has about 0.40% carbon. These amounts of carbon make them heat treatable. 4340 is a very high quality steel capable of very high "quench and temper" heat treatment up to 260,000 psi ultimate tensile strength with very good ductility.
Same Axles we use in Racing, Drifting, Auto X and more.
Make sure your Rear Subframe mounts, and Trailing arm bushings are good and not torn. This is the most common reason for axle failure. Also make sure to grease the end by the Differential. Verify your Trailing arms arent bent.
We need a minimum of 10 people, cost is $426 + $56 shipping to the lower 48. Normal cost is $502 + shipping. Lead time after we fill the list is 4-5 business days.
1) e30325it
2) t_daddy
3) unloadedak
4) AusScare
5) bragi
6) wildedge93
7) Dustin t
8 ) lurker27
9)
10)
These mostly speak for themselves, perfect for someone who wants some HD axles but does not want to break the bank. Ive run these on my 400hp drift car for awhile now (with 225/235 width sticky tires) countless launches and clutch kicks later and they're still as good as the day i installed them.
USA made!! Right in house
New Unit Not rebuilt.
No Core
Mounting hardware not included
We do not guarantee HP or TQ numbers. We have tried 500HP and some on more.
These are 4340 Chromoly
4340 has about 0.40% carbon. These amounts of carbon make them heat treatable. 4340 is a very high quality steel capable of very high "quench and temper" heat treatment up to 260,000 psi ultimate tensile strength with very good ductility.
- 100 percent new manufactured axle
- All axles are ABS consolidated for use in both ABS and non-ABS applications
- Each axle is torture tested to failure to insure that the axle is designed to meet or exceed OE requirements
- Uses top quality Neoprene boots
Same Axles we use in Racing, Drifting, Auto X and more.
Make sure your Rear Subframe mounts, and Trailing arm bushings are good and not torn. This is the most common reason for axle failure. Also make sure to grease the end by the Differential. Verify your Trailing arms arent bent.
We need a minimum of 10 people, cost is $426 + $56 shipping to the lower 48. Normal cost is $502 + shipping. Lead time after we fill the list is 4-5 business days.
1) e30325it
2) t_daddy
3) unloadedak
4) AusScare
5) bragi
6) wildedge93
7) Dustin t
8 ) lurker27
9)
10)
Comment