No noise, an is still in my car, an 83 633csi. Just picked up a 3.46. $200. needs new input shaft seal and both axle seals replaced.
Announcement
Collapse
No announcement yet.
Fs: s3.25 differential
Collapse
X
-
Originally posted by Austin! View PostYou change the cover and output flanges off your E30 diff. 10 min job.
E28 based cars may have a slightly different rear cover. I've done this on my 85 with an e30 diff, but I will take a pic and see if it matches my e24 diff
sigpic
Comment
-
~how much does it weigh, and are you willing to ship?
m20b27 Turbo. Hx35. Twinscroll Mani. MS1. 42lbers
http://www.r3vlimited.com/board/showthread.php?t=338818
Comment
-
Well this thread is gonna die real quick. What I thought to be a bad TO bearing, was actually the diff. So to correct myself, makes noise when off throttle in gear. Either that or the fact that most of the mounting points on the diff were loose, and me putting one in and tightening all the bolts down properly may have helped stop excess vibrations from coming into the car. I highly doubt the latter, so is this hunk of metal worth anything?
sigpic
Comment
Comment