Originally posted by nando
View Post
Announcement
Collapse
No announcement yet.
'91 ix...figured I introduce myself
Collapse
X
-
Originally posted by nando View Postreally? it's only an inch. I never had any problems with H&R sports.. they basically put you at stock height of a standard E30.
ix oil pans don't hang out in front of the subframe like RWD E30s. I don't think you need a skid plate with H&R sports. lol
It won't work. I have the same paint - it will soften it a little bit, but basically it's part of the paint now. if you really try to clean it you'll take the paint with it. so I just left it alone. Zymol Strik was a bit of a waste of money.
thanks for the heads up..is there anything else that might work or just leave that shit alone?'91 318i (Alpine) - daily
'88 325ix (Zinno) - drive here and there!
Comment
-
you can try it, I mean it'll work on the engine etc. It just didn't do much on mine.
Simple green soaked on the fenders worked some as well, but really you have to scrape it off with something soft. my fingernail worked but that would take.. forever!
I figure one day I'll just repaint the entire engine bay.
also, it's a rust protectant. no reason not to just leave it alone. it's ugly but at least it's not rusty!
Comment
-
Originally posted by 88e30ix View PostLeave it alone unless you planing to bring it to shows!Originally posted by nando View Postyou can try it, I mean it'll work on the engine etc. It just didn't do much on mine.
Simple green soaked on the fenders worked some as well, but really you have to scrape it off with something soft. my fingernail worked but that would take.. forever!
I figure one day I'll just repaint the entire engine bay.
also, it's a rust protectant. no reason not to just leave it alone. it's ugly but at least it's not rusty!'91 318i (Alpine) - daily
'88 325ix (Zinno) - drive here and there!
Comment
-
Originally posted by Polaris15 View PostI want a wooden wheel sooo bad. Jelly
I have a spare wood wheel, its a momo though not nardi if you're interested pm me..straight bolt on for an e30
Edit: got rid of the momoLast edited by fresh_TD; 08-27-2013, 10:18 AM.'91 318i (Alpine) - daily
'88 325ix (Zinno) - drive here and there!
Comment
-
Ok, so I took my intake mani out to clean, it's disgusting. I'm replacing gaskets and painting the manifold also valve cover gasket and painting as well, anything else I should do while I'm here? Fuel injectors should I just clean them or replace with bigger ones? Thanks in advance!
Sent from my GS4 Active'91 318i (Alpine) - daily
'88 325ix (Zinno) - drive here and there!
Comment
-
Originally posted by nando View Postfuel injectors you're best leaving alone - have them rebuilt, or get rebuilt ones. going with larger ones typically (but not always) causes problems. and if the motor is stock, there's no real gains.'91 318i (Alpine) - daily
'88 325ix (Zinno) - drive here and there!
Comment
Comment