I have read more threads, articles and websites about LSD's than I ever intended to. However, I still haven't read a straight answer if you can take the LSD unit from a 2.93, swap the ring gear and install it back in the 3.73 case. If it can't be done, tell me why. Gracias!
Announcement
Collapse
No announcement yet.
2.93 LSD Unit in a 3.73 Open
Collapse
X
-
It can't be done because the 3.73 crownwheel (ring gear) is thicker than a 2.93 crownwheel,
since the 3.73 pinion is so much smaller,
and the difference is made up for in the carrier.
The reverse can be done with a spacer, or so I hear.
On the internet.
tnow, sometimes I just mess with people. It's more entertaining that way. george graves
-
Originally posted by TobyB View PostIt can't be done because the 3.73 crownwheel (ring gear) is thicker than a 2.93 crownwheel,
since the 3.73 pinion is so much smaller,
and the difference is made up for in the carrier.
The reverse can be done with a spacer, or so I hear.
On the internet.
t
Sent from my SM-G920P using Tapatalk
Comment
-
Wait. No, it doesn't make any sense, now that I read it-
I must have been high.
The ring gears are about the same thickness, and THAT's
the reason the carriers are different- the 2.9 is spaced farther from
the pinion axis, and the 3.7 is closer, since the 3.7 pinion's a lot smaller than the 2.9's.
I THINK there are just 2 carriers, and the change happens with the low 3 ("3.07 and below is one size, 3.15 and up is the other" says George, below)
gear, with the ring gear thickness of the low ratios changed to make them work with the 'low'
carrier, and the high ratio thicknesses likewise will all work with the 'high' carrier.
THUS, with a spacer, you can use the 2.93 carrier with a 3.73 gear, but not the other way around.
Since the 2.9 carrier has more space between the mounting flange and the pinion axis.
NOW, as to who makes such a spacer (and is it such a good idea, anyway?) I dunno.
Metric Mechanic's website has some of this,
and one can only presume they were less
baked when they wrote it than when I wrote the above.
sorry,
tLast edited by TobyB; 06-13-2016, 01:49 PM.now, sometimes I just mess with people. It's more entertaining that way. george graves
Comment
-
Originally posted by TobyB View PostWait. No, it doesn't make any sense, now that I read it-
I must have been high.
The ring gears are about the same thickness, and THAT's
the reason the carriers are different- the 2.9 is spaced farther from
the pinion axis, and the 3.7 is closer, since the 3.7 pinion's a lot smaller than the 2.9's.
I THINK there are just 2 carriers, and the change happens with the low 3 (3.23 or something)
gear, with the ring gear thickness of the low ratios changed to make them work with the 'low'
carrier, and the high ratio thicknesses likewise will all work with the 'high' carrier.
THUS, with a spacer, you can use the 2.93 carrier with a 3.73 gear, but not the other way around.
Since the 2.9 carrier has more space between the mounting flange and the pinion axis.
NOW, as to who makes such a spacer (and is it such a good idea, anyway?) I dunno.
Metric Mechanic's website has some of this,
and one can only presume they were less
baked when they wrote it than when I wrote the above.
sorry,
t
But then again, would it really be worth the effort to do any of this?
Comment
-
Yep, a spacer can be fabbed, and it'll work.
Said the internets, a number of years back.
It's just the flange that was moved on the
carrier.
The pinion depth (relative to the ring) stays the same.
As to effort, I wouldn't think so. And I'd worry
about a spacer moving, and letting the bolts loosen.
That makes a royal mess out of small case diffs, which
do it occasionally.
hth
tnow, sometimes I just mess with people. It's more entertaining that way. george graves
Comment
-
Originally posted by TobyB View PostYep, a spacer can be fabbed, and it'll work.
Said the internets, a number of years back.
It's just the flange that was moved on the
carrier.
The pinion depth (relative to the ring) stays the same.
As to effort, I wouldn't think so. And I'd worry
about a spacer moving, and letting the bolts loosen.
That makes a royal mess out of small case diffs, which
do it occasionally.
hth
t
Sent from my SM-G920P using Tapatalk
Comment
Comment