hi, i've done a ton of research and did find one VERY detailed thread (might be on another forum) but cant seem to find it now.
so, i'm using the volvo fan and relay setup and i'm looking to get power from the jumper connection on the firewall. i will be doing this with a fuse and relay but i need to know if there is any switched +12v i can use to trigger the relay under the hood.
also, i just want to confirm how to wire the temp switch. i read a thread that says the brown wire can stay connected to the factory harness while the other 2 are cut and run to the volvo 2 speed controller, is that correct?
thank you
so, i'm using the volvo fan and relay setup and i'm looking to get power from the jumper connection on the firewall. i will be doing this with a fuse and relay but i need to know if there is any switched +12v i can use to trigger the relay under the hood.
also, i just want to confirm how to wire the temp switch. i read a thread that says the brown wire can stay connected to the factory harness while the other 2 are cut and run to the volvo 2 speed controller, is that correct?
thank you
Comment