Modding a m50b25

[0000000000]

Sorry for being a noob, but i've been searching everywhere on how to mod a non vanos m50. This is what i know....

- 95 m3 cams - Any other cams i can use that would give me better gains?
- Chip - i dont know what chip is the best other than tuner motorsports?
- exhaust - im going with 2.5 from manifold back. no cats 2 resonators.
- Intake - i can make a good intake setup with a heat sheild.

Anything else i can do?
- for NA gains.

Another question i have is where can i go shopping other than tunner motorsports?

[318isbmw]

Sorry for being a noob, but i've been searching everywhere on how to mod a non vanos m50. This is what i know....

- 95 m3 cams - Any other cams i can use that would give me better gains?
- Chip - i dont know what chip is the best other than tuner motorsports?
- exhaust - im going with 2.5 from manifold back. no cats 2 resonators.
- Intake - i can make a good intake setup with a heat sheild.

Anything else i can do?
- for NA gains.

Another question i have is where can i go shopping other than tunner motorsports?

M3 cams won't work on a m50nv. I can't remember which ones do work, but its somehtin like the intake one goes on exhaust side and then a custom intake one. Look that up, its been well covered, I just can't remember the ones exactly.

[0000000000]

so im gussing im going with shrick cams, what size?

[e30_kid89]

The trick is to get one schrick cam for the exhaust and move the stock exhaust cam to the intake side.

[0000000000]

HUH? That just threw me all of. Ok so take my stock exhaust cam over to my intake side than buy a new exhaust cam from shrick? What kind of power gains do i get?

[nando]

you can also use the S50 exhaust cam for your intake

[matt]

If you need schrick cams, get the part number or specs and email me. Even if you just need one, we can get them.

matt@racersmarket.net

[PiercedE30]

Get a schrick intake cam, and move the stock intake cam to the exhaust side.

[0000000000]

how do you time the cams

[matt]

With the tools. About $150 on ebay, I think.

Instructions are on the net in like 100 places, or you can get the TIS, or you can look in the bentley.

[0000000000]

im asking like do you just time it normally, like is the timming marks work or will they be oposite and so forth.

I know how to time cams, im just saying since i have two intake cams how do i time it.

[matt]

You'll need to degree them manually. Schrick will have the specs and it's a pretty painless process, not that i've ever done it.

Or you may be able to just do them the regular way. :dunno

[0000000000]

You'll need to degree them manually. Schrick will have the specs and it's a pretty painless process, not that i've ever done it.

Or you may be able to just do them the regular way. :dunno

do you guys have any turbo manifolds that will work with a m50 in a e30?

[matt]

Sure:

http://www.racersmarket.net/catalog/product_info.php?cPath=21&products_id=29

[0000000000]

really that fits a e30?
I ve been told no one makes a manifold for a m50 that works in a e30