Splitters - IS, Early IS, and Reiger

[thereisnoyun]

So after looking around for someone to do some splitters for me to no avail. I'm picking up the torch where 318isbmw left off. 318isbmw is a very good guy who pointed me in the right direction.

Mine is the exact same thing that he built.

http://www.r3vlimited.com/board/showthread.php?t=112692&highlight=splitter

3/16 inch thick, abs black plastic. Super thick.

The price for splitters are as follows

Early IS are 75 a piece
IS lip are 90 a piece
Reiger are 110 a piece.

All prices are shipped and will come with mounting screws.

here are the ones I made.




Me and texasterp will be making these. Standard cuts are 1.5 inches front and 1.5 inches rear extra. If anyone want any extra plasitc to extend further just lmk.

PM me if interested.

- Yun

[thereisnoyun]

bump

[Alkasquawlik]

I want a splitter, but I don't have any money at the moment. Hopefully over the summer.
good luck with your sales

[Dozyproductions]

I want a splitter, but I don't have any money at the moment. Hopefully over the summer.
good luck with your sales

x2

[Fidhle007]

Ooh, I may be in for a rieger splitter at some point. Are you going to do a full undertray option like 318isbmw's splitters?

[thereisnoyun]

Ooh, I may be in for a rieger splitter at some point. Are you going to do a full undertray option like 318isbmw's splitters?

yes I can, but for hte reiger its kind of difficult considering the bend is already tapered. PM me when you are ready and we can work out the details. The problem in going all the way back is that also it makes me make one less splitter per sheet of ABS. (I'm assuming going all the way back is like one foot or something. )

[bimmer_E30]

i will be down for a Rieger splitter too!

[RobE30]

Thats cool. On my 87 is I used an ABD carbon fibre (vw stuff) splitter from a mk3 that I shortened a bit in the middle, but it was 2 pieces not one. I like yours better! Bump for nice looking product and good price

[der affe]

everyone will hate me for this, but full undertray style for a volvo lip?

[Fidhle007]

everyone will hate me for this, but full undertray style for a volvo lip?

[der affe]

i had a feeling you would chime in. :) it will look good with the ix flares and skirts and painted body colour.

[kamotors]

the splitters look really nice.

[TexasTerp]

everyone will hate me for this, but full undertray style for a volvo lip?

Idk, we would have to source a volvo lip first in order to make the correct bends.

the splitters look really nice.

Thanks! Yun did a great job creating the template, it took me a while to sand down my early is to get a clean arc all the way around. The more we make the better they get!

[Stephen]

everyone will hate me for this, but full undertray style for a volvo lip?

extra brownie points if you make the mounting screws so that the sides are tucked. This was my idea a while ack, but whatever, you have more experience building them

[16v of E30]

$90 Eh?

how much more to canada?

and how bout sideskirts...bet you could make those really cheap too. make some cool OEM+ style sideskirts and i'll buy the whole lot.