Is there any interest out there for an '88 Zinnoberrot 325i with a CARB certified OBD1 S52?
video of car with 4.10:1 lsd (now has 3.73:1 lsd) and old M20 (pre S52) and it has different wheels now. http://www.youtube.com/watch?v=_ha2QJMGQ0Y
Here's a small list:
-CARB certified and smogged (March 2009) OBD1 S52 (from '99 MZ3)
swapped in at 40k miles, now has 50k miles
-Custom Active Autowerke chip (re-burnable), red label 413 DME
-8lb JB Racing lightweight flywheel
-3.73:1 LSD (45k miles) MZ3 finned cover
-Metal impeller water pump (1 year old)
-80deg C thermostat
-Aluminum thermostat housing
-less than 1 year old stock E30 radiator (w/ all new hoses)
-AKG swap E21 brake booster
-AKG harness adapter (I added the check engine light wire)
-AKG Heim front control arm mounts
-AKG 75d trailing arm bushings
-AKG 75d Differential mount
-AKG 75d rear subframe bushngs
-Ireland Engineering adjustable 25mm front sway bar
-Ireland Engineering adjustable 22mm rear sway bar
-Ireland Engineering polyurethane steering coupler
-H&R Race springs
-Custom valved Bilstien front strut inserts
-Custom valved Bilstien rear shocks
-JT Designs poly rear shock mounts
-Ireland Engineering front strut brace
-Ireland Engineering rear brace
-Custom 4 point roll bar
-Scroth street harness
-Corbeau drivers seat w/ Sparco side mounts
-MOMO mod 78 steering wheel
-TR motorsports C1 15x8 wheels w/ 45% tread Hankook Ventus RS-2
225/40r15
-SS brake lines
-Axxis street/track pads
-Center console (below radio) gauge pod currently only has oil temp gauge installed, has 2 more openings for gauges.
-Crack-free dash--tan leather interior
Great car to start auto-xing/tracking with. I used to Auto-x this car when it had the M20 in it. Since the swap it hasn't seen any auto-x or track duty. I also have an E36 3.2 lock to lock steering rack and a Euro oil filter housing modified for U.S. vanos oil line with HMS -10 AN fittings and an oil cooler that can bee installed. I have a bunch of random parts I'll throw in with the deal, if you want them. I'm selling this because I may be moving and don't feel like transporting it.
I'll just build another one!
$11,000 o.b.o. Really Motivated to Sell
Here are a few pics, I'll try to get some better ones this weekend
Also considering trade for 4x4 F-150.
Don't mind the dates on the pics I just took them today 9/11/09.
Jason 760-580-4614 (I want to sell it this weekend!) Valley Center CA
Flickr photo set:
video of car with 4.10:1 lsd (now has 3.73:1 lsd) and old M20 (pre S52) and it has different wheels now. http://www.youtube.com/watch?v=_ha2QJMGQ0Y
Here's a small list:
-CARB certified and smogged (March 2009) OBD1 S52 (from '99 MZ3)
swapped in at 40k miles, now has 50k miles
-Custom Active Autowerke chip (re-burnable), red label 413 DME
-8lb JB Racing lightweight flywheel
-3.73:1 LSD (45k miles) MZ3 finned cover
-Metal impeller water pump (1 year old)
-80deg C thermostat
-Aluminum thermostat housing
-less than 1 year old stock E30 radiator (w/ all new hoses)
-AKG swap E21 brake booster
-AKG harness adapter (I added the check engine light wire)
-AKG Heim front control arm mounts
-AKG 75d trailing arm bushings
-AKG 75d Differential mount
-AKG 75d rear subframe bushngs
-Ireland Engineering adjustable 25mm front sway bar
-Ireland Engineering adjustable 22mm rear sway bar
-Ireland Engineering polyurethane steering coupler
-H&R Race springs
-Custom valved Bilstien front strut inserts
-Custom valved Bilstien rear shocks
-JT Designs poly rear shock mounts
-Ireland Engineering front strut brace
-Ireland Engineering rear brace
-Custom 4 point roll bar
-Scroth street harness
-Corbeau drivers seat w/ Sparco side mounts
-MOMO mod 78 steering wheel
-TR motorsports C1 15x8 wheels w/ 45% tread Hankook Ventus RS-2
225/40r15
-SS brake lines
-Axxis street/track pads
-Center console (below radio) gauge pod currently only has oil temp gauge installed, has 2 more openings for gauges.
-Crack-free dash--tan leather interior
Great car to start auto-xing/tracking with. I used to Auto-x this car when it had the M20 in it. Since the swap it hasn't seen any auto-x or track duty. I also have an E36 3.2 lock to lock steering rack and a Euro oil filter housing modified for U.S. vanos oil line with HMS -10 AN fittings and an oil cooler that can bee installed. I have a bunch of random parts I'll throw in with the deal, if you want them. I'm selling this because I may be moving and don't feel like transporting it.
I'll just build another one!
$11,000 o.b.o. Really Motivated to Sell
Here are a few pics, I'll try to get some better ones this weekend
Also considering trade for 4x4 F-150.
Don't mind the dates on the pics I just took them today 9/11/09.
Jason 760-580-4614 (I want to sell it this weekend!) Valley Center CA
Flickr photo set:
Comment