Okay so my shell is kind of trash and im looking for a nice coupe to buy so i can DD and part out my car once i sell the motor out of it!
It is a M20B25
WORK/PARTS:
Block has been bored to 84.48 and decked and hot tanked
Head was fully rebuilt with new seals, decked, and refinished valves
Micro polished crankshaft and camshaft
MaxSil pistons and rings fitted to block
Forged CX Racing H-Beam rods
Reinz HG, VC gasket, oil pan gasket
New bearings
WoodGrain Valve Cover (:
Metric Blue head bolts
Long Tube headers with new gaskets
NEW cps, dizz/rotor, thermostat/housing, coolant sensors, all new cooling hoses, rear main seal, aux seal, cam seal, crank seal, freeze plugs
Rebuilt PS pump and new hoses
All new belts
NEW solid condor mounts for tranny and block
NEW flame thrower ign coil
NEW water pump
NEW slave
NEW flywheel bolts
NEW (Upgrade/updated to metal) rear seal
Cleaned and painted intake manifold with new gaskets
NEW Sach's throwout and pilot
Allllll mated to a 5spd Getrag 260 shifting in all gears smooth with a stage 2 eGay clutch!!!!!
I know i probably missed a few things...
But to cut it short and sweet
I did not reuse ANY gaskets except throttle body gasket because the intake was last minute
everything is either new/rebuilt/machined
AND I HAVE ALLLLLLLLL THE RECEIPTS
Go through the pictures in my build thread http://www.r3vlimited.com/board/showthread.php?t=290464 i do not feel like posting them alllllll again lol
WHATS INCLUDED!
5spd getrag with with clutch
Hoses
Intake
Sensors
Motronic 173 and 153 both good
Flame thrower coil
Whole motor
Shifter Linkage
A box of other spare brand new parts
Mounts for tranny and motor
valve cover MAYBE (:
My wire harness is shot so you need your own for a late model 325i coupe
Since i have to put a price on it...
3800obo
I know its not boosted or anything, but its literally brand new and i have more in it with parts and machine time and labor and im throwing in the good tranny and everything else with it
Everything is already assembled and torqued
You can PM me or shoot me a text/call 919-244-1475
It is a M20B25
WORK/PARTS:
Block has been bored to 84.48 and decked and hot tanked
Head was fully rebuilt with new seals, decked, and refinished valves
Micro polished crankshaft and camshaft
MaxSil pistons and rings fitted to block
Forged CX Racing H-Beam rods
Reinz HG, VC gasket, oil pan gasket
New bearings
WoodGrain Valve Cover (:
Metric Blue head bolts
Long Tube headers with new gaskets
NEW cps, dizz/rotor, thermostat/housing, coolant sensors, all new cooling hoses, rear main seal, aux seal, cam seal, crank seal, freeze plugs
Rebuilt PS pump and new hoses
All new belts
NEW solid condor mounts for tranny and block
NEW flame thrower ign coil
NEW water pump
NEW slave
NEW flywheel bolts
NEW (Upgrade/updated to metal) rear seal
Cleaned and painted intake manifold with new gaskets
NEW Sach's throwout and pilot
Allllll mated to a 5spd Getrag 260 shifting in all gears smooth with a stage 2 eGay clutch!!!!!
I know i probably missed a few things...
But to cut it short and sweet
I did not reuse ANY gaskets except throttle body gasket because the intake was last minute
everything is either new/rebuilt/machined
AND I HAVE ALLLLLLLLL THE RECEIPTS
Go through the pictures in my build thread http://www.r3vlimited.com/board/showthread.php?t=290464 i do not feel like posting them alllllll again lol
WHATS INCLUDED!
5spd getrag with with clutch
Hoses
Intake
Sensors
Motronic 173 and 153 both good
Flame thrower coil
Whole motor
Shifter Linkage
A box of other spare brand new parts
Mounts for tranny and motor
valve cover MAYBE (:
My wire harness is shot so you need your own for a late model 325i coupe
Since i have to put a price on it...
3800obo
I know its not boosted or anything, but its literally brand new and i have more in it with parts and machine time and labor and im throwing in the good tranny and everything else with it
Everything is already assembled and torqued
You can PM me or shoot me a text/call 919-244-1475
Comment