e30 Car horn not working

[park123xyz]

Hey guys... Where should I begin if My car horn is not working on my 88' 325iX? I have checked the fuse and it seems fine.. The only reason I meed to fix it is to pass inspection. Should I just install a temporary one for it to work and so i cam pass or what? Also where is the horn located on my model I cant find it! Lol.


Sent from my iPhone using Tapatalk

[dnguyen1963]

Have someone press the horn button on the steering wheel while you listen for the relay clicking. If it does click then your horns are dead. They are simple to replace. You can buy replacement horns from many places for about $10/ea. Horns are located up front. Remove the splash guard, craw under, and you can see them...one on each side.

[park123xyz]

Have someone press the horn button on the steering wheel while you listen for the relay clicking. If it does click then your horns are dead. They are simple to replace. You can buy replacement horns from many places for about $10/ea. Horns are located up front. Remove the splash guard, craw under, and you can see them...one on each side.

Thanks!


Sent from my iPhone using Tapatalk

[park123xyz]

Does anyone know if this relay is good for the horn relay??


http://www.pelicanparts.com/cgi-bin/...orter=date_new


Sent from my iPhone using Tapatalk

[ST1G]

Does anyone know if this relay is good for the horn relay??


http://www.pelicanparts.com/cgi-bin/...orter=date_new

Yes, Bosch standardized relays. That one will work fine.

[long tall eta]

is there a connection in the steering wheel that can also fail?

[ST1G]

is there a connection in the steering wheel that can also fail?

Yes, depending on the wheel.

[long tall eta]

Yes, depending on the wheel.

mine's not working, relay is good and i doubt if both horns quit at the same time. sport wheel.

[ST1G]

mine's not working, relay is good and i doubt if both horns quit at the same time. sport wheel.

The sport wheel has connectors inside the button. Pull the button off and make sure they are connected and not corroded or loose.

How do you test to make sure the relay was good?

[long tall eta]

The sport wheel has connectors inside the button. Pull the button off and make sure they are connected and not corroded or loose.

How do you test to make sure the relay was good?

swapped relay with known working one. don't now if it maters but the wheel is an mt1

[ST1G]

swapped relay with known working one.

Perfect. Make sure everything inside the horn button is connected up.