so, by now you've hear a lot of things about putting either of the two styles of M20 single mass flywheels on a 24-valve engine.
the thing is, if you just bolt it in you'll end up with something like this:
and that won't work at all.
so, your options are;
1.) machine down flywheel
2.) get two shorter pan bolts and shave down the mount steps
I chose #2 because it takes 5 minutes and was free.
perfect clearance. sawzall and a 4.5" cutoff wheel. did this with the engine in the car, no problem.
hope this helps.
the thing is, if you just bolt it in you'll end up with something like this:
and that won't work at all.
so, your options are;
1.) machine down flywheel
2.) get two shorter pan bolts and shave down the mount steps
I chose #2 because it takes 5 minutes and was free.
perfect clearance. sawzall and a 4.5" cutoff wheel. did this with the engine in the car, no problem.
hope this helps.
Comment