S54 swap parts - Z3M harness, maintenance parts, O2 sensors, flashed MSS54HP

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • nando
    Moderator
    • Nov 2003
    • 34827

    #1

    S54 swap parts - Z3M harness, maintenance parts, O2 sensors, flashed MSS54HP

    Finally collected some of my parts that I was going to use for an S54 swap - I've decided to change directions.

    I've got a lot of maintenance parts, seals, gaskets, etc. Including the valve cover gaskets, water pump gasket, a new oil pump drive chain, and new O2 sensors (the bosch and NGK are compatible and can be used together). the O2 sensors are like $80+ a piece by themselves. $150 for the whole lot.






    Also in that set of pictures is an MSS54/52 DME connector. This would be perfect if you wanted to build an adapter for MS3 or some other standalone to be used with a stock S54 or S62 harness. I got this as a sample directly from Tyco, you can't buy it on your own. $25 for the connector.

    Z3M harness is sold. I still have a coil harness and full power/body harness (has O2 sensors, relays, etc). $50 each.





    Additionally, I have an MSS54HP which will include a standalone flash for an E30 (or whatever car you want), with a euro based tune. I can tweak it to your liking as well. $700 shipped.



    a set of stock S54 cams in good shape. What you see is what you get - no damage/pitting. $75 shipped.





    I probably have more stuff that I haven't found yet, I'll post it when I do. thanks for looking!
    Last edited by nando; 03-30-2015, 05:32 AM. Reason: Z3M harness sold
    Build thread

    Bimmerlabs
  • nando
    Moderator
    • Nov 2003
    • 34827

    #2
    Z3 M harness sold - still lots of good parts left. :)
    Build thread

    Bimmerlabs

    Comment

    • Bimmer_man
      E30 Fanatic
      • Jan 2013
      • 1477

      #3
      You have a pm on the ecu
      Float like a cadillac sting like a Bimmer!:)

      sigpic

      Comment

      • Bimmerman325i
        R3V OG
        • Dec 2007
        • 6854

        #4
        Sent you a pm on body harness.
        2017 Chevrolet SS, 6MT
        95 M3/2/5 (S54 and Mk60 DSC, CARB legal, Build Thread)
        98 M3/4/5 (stock)

        Comment

        • nando
          Moderator
          • Nov 2003
          • 34827

          #5
          It's actually all sold, sorry. Haven't had a chance to update the post.
          Build thread

          Bimmerlabs

          Comment

          Working...