FS Ny Area: Swapped 3 Series

[Widm3r]

I have a 1990 325i with 95 m3 motor swap all sorted out and i shattered the pan and dont have the time to fix it. Best offer takes it.

[dannyg]

pics?

[Spiff325iS]

Price? Specs? What else is done.....

[Ex Lion Tamer]

Well considering there's no other offers or information, I'll give you $20 :)

But if you provided a bit more, I could be more realistic.....

[Red88]

Well considering there's no other offers or information, I'll give you $20 :)

But if you provided a bit more, I could be more realistic.....

$300. I'm being realistic.

[MR 325]

Would it be hard to post information about the car?

Post a price or this will be deleted.

[Widm3r]

It is swapped with a e36 95 m3 (s50)

Has all wiring merge done by my friend who has done quite a few swaps and is very talented with wiring, and electrical work.

Treehouse booster
e30 m3 brake master cylinder
shrick 288 cams (exhaust/intake)
540i mass airflow
24# injectors
e34 m5 mounts
BROKEN OIL PAN(has PIN HOLES) from hitting a grate that was sticking out of the road, turned off car immediately after and watched the 5 or so quarts drain out of the motor and then another quart on my driveway since it is sloped.
Turner Chip
Ebay headers
Custom exhaust
MOMO 300MM Drift Style Steering Wheel
E30 M3 Interior
GC Sleeve coils w/ Koni dampeners
Powerflex bushings, new bimmerworld control arms, new rtabs
4.10 diff
ZF Tranny Spec Clutch and Flywheel

Brembo blanks
Hawk HPS pads
Brand new calipers
Bimmerworld stainless steel lines

I am sure there is more that i am forgetting about, but shoot me an offer as i need this thing out of my driveway since my parents are hounding me about it and i have another project undergoing.

$5000 or best offer

[Widm3r]

The shell is rough and was going to receive a respray but it is straight

[Julien]

hmmmm how "rough" is the body?

[Widm3r]

it has a cracked rear bumper, 19 year old paint, and rust in the battery tray area...

[e30polak]

How was the power below 3,000 rpms with those cams? How about after? Any dyno sheets?

[Peterkaczynski]

pics plzzzz

[Widm3r]

How was the power below 3,000 rpms with those cams? How about after? Any dyno sheets?

I had 4.10 gearing so i would not be able to give you a great answer since you have the 3.47 gearing if i am not mistaken. But it pulled great and was seemed to be very responsive. The car pulled like a champ and unfortunately it was never dyno'd. I would say its comparable to sunbelts setup

[Widm3r]

pics plzzzz

I will work on that, but it probably will take me sometime, i should have some during/after the weekend.

[nmlss2006]

Potentially interested pending pics, at the right price.
Edit: schrick 288/288 cammes? For an S5x?