1989 325is - M50nv Swap - Memphis, TN

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • herlsy
    Grease Monkey
    • Sep 2009
    • 339

    #1

    1989 325is - M50nv Swap - Memphis, TN

    Model: 1989 325is Coupe
    Miles: 224xxx
    Body Color: Schwarz (Black)
    Interior Color: Black
    Price: 5k obo

    PM me with questions, appointments, test drives



    Other pictures here: http://s199.photobucket.com/albums/aa242/herlsy/325is/

    'Bad' things:

    Chip in windshield.
    Small crack at very top of windshield.
    Quarter panel dent near b-pillar, missing trim (trim piece with sale)
    Dent in lower drivers side fender
    Small dings over most of car, trunk, drivers side.
    Bad touchups have been done on car.
    Hood has a slight dent in it.
    3/4 inch gash in drivers side leg bolster


    Drivetrain:

    M50 Non Vanos
    Bavarian Autosport Chip in ECU (stock ECU included)
    Head refreshed, cleaned and inspected, decked, new valve stem seals installed.
    New upper and lower gaskets installed
    AKG Motor Mounts
    New Vacuum Hoses
    New Water Hoses
    New 79 Degree Cel Thermostat
    BMW 15w40 Oil
    BMW Coolant
    E30 318is Radiator
    Electric Puller Fan

    ZF310 Transmission with Redline ATF
    E36 328i Shift Assembly, Delrin Bushing Installed
    E21 Transmission Mounts
    New Flex Disc
    E30 325e Driveshaft
    New center support bearing.
    3.23 LSD


    Custom exhaust, 2.5in
    Magnaflow center muffler (4" single in out)

    Magnaflow rear muffler (single in/out)

    Dual exhaust tip




    Suspension/Steering/Brakes

    E36 Steering Rack
    Meyle Control Arms
    E30 M3 Style offset control arm bushings, Delrin.
    New Tie Rods

    Stainless steel brake lines
    Lots of life left on brake rotors/pads

    Front struts: OEM Boge Sport
    Rear shocks: Bilstein Touring
    Ireland Engineering rear shock mounts
    Vogtland Springs

    4x 14x6.5 OEM Basketweaves with caps
    Sumitomo tires with plenty of tread left
    1x 14x6.5 OEM Basketweave spare


    Interior:

    Leather sport seats
    Mtech 2 steering wheel 370mm missing leather.
    Original grey carpet/parcel shelf
    Dash is cracked, with molded cover on top (crack free dash included with sale)
    Functioning odometer, new gears installed, european symbols in cluster.
    All dash lights working, no check panel lights illuminated.
    Radio works but sound is crap due to amplifier being out.


    Exterior:

    6/10
    Dented drivers side quarter near B pillar
    Dings, touchups over most of car.
    Paint overall isn't too bad when clean.
    Bumpers, front valence are in good condition.
    New trunk seal.
    Euro trim on front/rear bumpers.
    Euro grilles.
    Working electric antenna.
    Stock projector headlights.




    Misc
    New gas tank installed last year
    New TRE 255 Fuel Pump
    Tool Tray with tools.
    Factory Jack
    Factory lug wrench
    BBS Cap Wrench.

    NO Air Conditioning.
    I have the A/C Compressor for the M50, and some splicers/fittings included with sale.
    Condensor is on car with fan.
    Last edited by herlsy; 04-30-2012, 06:36 PM.
  • ahheck09
    Member
    • May 2007
    • 53

    #2
    pmd
    1987 325i 5-speed: Sold :: 1987 M-tech 1 325is 5-speed

    Comment

    • moe30
      Mod Crazy
      • Jun 2010
      • 721

      #3
      How bad is the dent on the rear quarter? Can't really tell in the pics. Does it run and drive alright?

      Comment

      • herlsy
        Grease Monkey
        • Sep 2009
        • 339

        #4
        Originally posted by moe30
        How bad is the dent on the rear quarter? Can't really tell in the pics. Does it run and drive alright?
        I'll try and get a better pic of it when weather permits, it's a decent size but might be able to be worked out by a pro. It runs and drives pretty nice, surprisingly smooth ride for an old car that is also lowered.

        Comment

        • e46_dude
          Advanced Member
          • Dec 2007
          • 166

          #5
          Bump for a good guy.

          I have seen this car during various stages of the swap. No corners were cut at all.

          Comment

          • d:\program
            Noobie
            • May 2009
            • 26

            #6
            Memphis

            Sweet ride. Wish I could afford it! You don't happen to work at the shop on Central do you?

            Comment

            • M3 Cereal
              Advanced Member
              • Feb 2011
              • 187

              #7
              wow this is a really nice project. should be a fun car. bump

              Comment

              • Repiv
                Noobie
                • Mar 2010
                • 12

                #8
                Very nice car. Everything was done right on it. If only someone would buy my 318is for way more than it is worth...
                1991 318is - The real slowness / DD / autox beater
                1988 M3 - S52 swapped slowness / DD Project

                Comment

                • domvr6
                  Noobie
                  • Nov 2007
                  • 1

                  #9
                  pmd, i'm local and would like to come check it out.

                  Comment

                  • Blitanicle99
                    Noobie
                    • Dec 2010
                    • 9

                    #10
                    Mas pictures por fa vor~!
                    http://www.r3vlimited.com/board/showthread.php?t=191124

                    ^^^^^^^^^
                    Trade me your clean E30 for a badass sportbike!!!!

                    Comment

                    • evoDRichie
                      E30 Mastermind
                      • Jan 2010
                      • 1743

                      #11
                      still avl?
                      sigpic
                      Who`s attention, and why do I have to pay them?

                      Comment

                      • bostonbmw
                        E30 Addict
                        • Nov 2004
                        • 429

                        #12
                        What model/brand puller fan is that ?

                        Comment

                        • Killacortes
                          E30 Mastermind
                          • May 2010
                          • 1937

                          #13
                          i love me some non vanos! wish i had mine back good luck with sale man!
                          Originally posted by blunttech
                          r3v does not fuck around. First you get banned, then they shoot you

                          Comment

                          • herlsy
                            Grease Monkey
                            • Sep 2009
                            • 339

                            #14
                            bump

                            Comment

                            • herlsy
                              Grease Monkey
                              • Sep 2009
                              • 339

                              #15
                              Sold

                              Comment

                              Working...