FS: 1987 325ic 2.7(turbo ready)

[general246]

http://forums.bimmerforums.com/forum/showthread.php?t=1672124

feel free to ask any questions

[general246]

bump

[general246]

87' 325iC 2.7(turbo ready)
i am finally puttin the "ole digga" up for sale.
1987 bmw 325ic. 180kmh(under 120miles) on body w/ZERO RUST!!. ive owned the car for almost 1 yr, b4 that it was my service manager at bmw project car for 5yrs. car has had full bodywork so no dents scratches or anythin but it is still in its prime stage and i kinda like it w/ that look thats why its still that way. car is rarely driven as it is not a daily driver w/ such parts(gas sucks sry) but and excellent weekend/ drag/autocross car. car has been autocrossed twice, once in my possession and dragged once 3 yrs ago. as you can c motor is rarely ran because it was built for high boost but no time to go turbo, in 3yrs car has only 8k on motor as of now. now on to business.

THE BEAST

Engine:
M20 B27 fully built low compression (8k on motor since build & turbo ready)
I-head has 3 angle valve job & ported and polished(fresh)
CP forged piston 85mm set from VAC motorsports(low compression=high boost)
325E bottom end w/ IE titanium H-beam rods 135mm)
Polished m21 turbo diesel crank
IE Race coated bearings (+.010``)
Cosmetic headgasket 81mm
ARP head bolts
21# mustang injectors
markD chip
m30 AFM
new bosch plug wires
new bosch cap and rotor
new bosch fuel pressure regulator
new oil pump
stock 325is shorty headers
billy boat tri-flow exhaust( best sounding exhaust to me)

Drivetrain:
325is 5spd transmission
TCD stage 2 m20 clutch kit
Z3 short shift kit
Fresh guibo & center bearing
3.73 LSD
Rotors are not new but are very good & hawk ceramic pads have plenty life(car stops)
Stainless steel brakes lines
Rebuilt calipers

Suspension:
Bilstein sport shocks
H&R race springs
Z3 steering rack
H&R sway bars (front & rear)
New sway bar endlinks
New wheel bearings, ball joints & tie rods
All bushings polyurethane(control arms,sway bar, trailing arms..etc)

Exterior:
Car is already bodywork and primed( no dents or nothing & ZERO RUST)
Car is in flat dark gray primer
Euro smiley headlights
Convertible top works

Interior:
Euro gauge cluster
Nice e30 sport seats( semi-bucket)
Extremely rare Momo wooden steering wheel( style discontinued and cost me over $300 when bought new)
Wood trim shifter & e-brake handle
Dinan floor mats
Black door panels

The Bad:
broke 1 of the H&r springs last week on the highway and only found 2 springs laying around at the dealer that fit in order for me to get home safely w/o damaging anything. havent drove vehicle since i drove it home last week on those springs. still have the H&R's in the front.

feel free to ask any questions, if i cant answer all of them i will get the answers for you. all the new owner needs is a turbo kit and he will have a very very fast car to contend with. car is priced at $4800 O.B.O. i am selling the car due to i am going away to study and have no more use for it unless it will sit for a few yrs and i dnt want that. i just sold my e36 now it hurts me but i have to let my baby go.
http://i1223.photobucket.com/albums/...0411153601.jpg
http://i1223.photobucket.com/albums/...0411153746.jpg
http://i1223.photobucket.com/albums/...0411153724.jpg
http://i1223.photobucket.com/albums/...0411153708.jpg
http://i1223.photobucket.com/albums/...0411154105.jpg
http://i1223.photobucket.com/albums/...0411154133.jpg
http://i1223.photobucket.com/albums/...0411153532.jpg
http://i1223.photobucket.com/albums/...0411153501.jpg

BUMP!!!!!!

[general246]

to the top it goes....

[general246]

bump

[general246]

bump!!!! new price $4800 OBO....car needs to go or it will jus sit for 4 yrs

[general246]

bump for new low price $4800......time is almost out.....car needs to go....any close offer will be entertained....

[Dcha]

The silence in your thread is deafening, but are you listening to what it's telling you?

[general246]

The silence in your thread is deafening, but are you listening to what it's telling you?

took someone long enough to start talking trash....np....to the top

[general246]

Car needs to go within time frame so any real offers will be entertained.

[general246]

bump

[HR2L]

Ill take the motor and transmission off your hands. :)

[sharky]

Buddy you got killed over on bimmerforums and now you are bringing it here. Obviously 2 enthusiast forums agree your price is insane, do you even have documentation or pics of all the work done? If you need to sell in the next few days you better drop to 1500 or so to move it.

[general246]

Buddy you got killed over on bimmerforums and now you are bringing it here. Obviously 2 enthusiast forums agree your price is insane, do you even have documentation or pics of all the work done? If you need to sell in the next few days you better drop to 1500 or so to move it.

listen all forums are the same as ppl will talk shit whether we like it or not. that does not bother me as i know what the car has done to it.....i am a bmw tech and it was owned by my service manager for 5yrs where as parts were just dumped into it and only bmw techs & master techs put their hands on the car...you can ask anyone at herb chambers bmw of boston about the car or maybe if someone was interested i would get all of that information for one such person but until then it remains as is with price....you've done nothing but tell me how to price something that is mine...if you dont like it then you can kick rocks or just be quiet....simple as that....i have no problem keeping my car and building her into something beautiful over the years to come...GOOD TALK

[general246]

bump!!!!