SOLD Thanks
Im putting my 86 E30 track car up for sale here are the specs
Only reason for sale is i just picked up an E21....
Suspension...
Ground control coil overs up front
Koni adjustable shocks
Ground Control caster/camber plates
550/650 springs
off set lower control arm bushings
E36 M3 rack with e30 tech spacer kit
Pwr steering delete kit
Brand new tie rods and inner rods
Turner Motorsports rear upper shock mounts
Tokico blue HD shocks out back
Brakes......
Massive Lee 300mm 4 piston wilwood setup up front with poly matrix E race pads
stock rear set up with new discs and Hawk HT10 pads
ATE super blue fluid
Wheels.....
Apex arc 17 x 8 up front with 235 40 17 NT05 one track day on them
17 x 9.5 custom made rims out back with 255 40 17 NT05`s
4 of 225 45 17 track slicks included
Motorsports Hardware 90mm stud and nut kit all round
Motorsports Hardware 20mm spacers all round
Body...
Tucked front bumper
Rolled fenders for clearance
gutted interior but I kept all of it except carpet ( its a bone interior )
comes with a Corbeau seat and set of harnesses
Engine...
curently has the E motor with a turner chip runs fantastic...
Clean title and can be registered also...
This is a cheep way to get into track days just add fuel and go....Looking to get $4000
call me with any questions..Barry 631 504-1440 located on Long Island NY


Im putting my 86 E30 track car up for sale here are the specs
Only reason for sale is i just picked up an E21....
Suspension...
Ground control coil overs up front
Koni adjustable shocks
Ground Control caster/camber plates
550/650 springs
off set lower control arm bushings
E36 M3 rack with e30 tech spacer kit
Pwr steering delete kit
Brand new tie rods and inner rods
Turner Motorsports rear upper shock mounts
Tokico blue HD shocks out back
Brakes......
Massive Lee 300mm 4 piston wilwood setup up front with poly matrix E race pads
stock rear set up with new discs and Hawk HT10 pads
ATE super blue fluid
Wheels.....
Apex arc 17 x 8 up front with 235 40 17 NT05 one track day on them
17 x 9.5 custom made rims out back with 255 40 17 NT05`s
4 of 225 45 17 track slicks included
Motorsports Hardware 90mm stud and nut kit all round
Motorsports Hardware 20mm spacers all round
Body...
Tucked front bumper
Rolled fenders for clearance
gutted interior but I kept all of it except carpet ( its a bone interior )
comes with a Corbeau seat and set of harnesses
Engine...
curently has the E motor with a turner chip runs fantastic...
Clean title and can be registered also...
This is a cheep way to get into track days just add fuel and go....Looking to get $4000
call me with any questions..Barry 631 504-1440 located on Long Island NY



Comment