feeler: my 84 e30.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Jean
    Moderator
    • Aug 2006
    • 18228

    #1

    feeler: my 84 e30.

    For a reason I am not going to get into I am considering selling this car, make me an offer.

    Clean title 84 318i with 16Xxxx miles on it. It's got about 5k worth of new parts on it not counting labor.

    new windshield, all new hoses, belts, fluids, radiator, pump, tstat, o2 sensor.
    new plugs, wires, rotor, cap, new speed sensor.
    new control arms, new m3 cabs.
    newer style dash w/o the o2/air bag lights and m-tech 1 steering wheel
    working cluster with a bypassed si board.
    no a/c and no heater, completely removed.
    bilstein sports, gc coilovers, gc plates, new swaybar end links.
    3.73 lsd with redline fluid
    new brembo 325 vented front brakes, rear disc brakes, new lines and new 325mc
    new sachs clutch kit, new master and slave cylinders ($800 worth of clutch work), flywheel
    new shifter bushings, clips etc
    cloth sport seats
    plastic front and rear bumpers, newer style front valance including brake ducts, fog covers, i lip and rear plate filler. oem hella ellipsoids.
    fuel level sender and alternator were replaced with a good used part.
    electrical fan wired for low speed at all times, kicks in to full speed at 1/2 temp. mounted with oem brackets.
    got a brand new cd / mp3 player and front/rear speakers.
    new black front/rear oem floormats.
    black fender molding, front is also installed just not pictured, rear is on order.
    basketweave wheels with falken azenis rt615 195/60/14 tires, matching basketweave spare wheel but w/o a matching tire.

    also comes with an e35 3.2 lock to lock ratio steering rack, brand new lemforder complete tierods and boots/clamps. This is not installed as I was going to wait until engine swap. Also comes with not installed black microfiber headliner and rear shelf cover, not installed and microfiber shift and e-brake boots. Car passed smog with no problems, reg is current.


    Things that this car needs : engine / tranny swap / exhaust and possibly a drive shaft.

    Looking for best offer.

    thanks.
    Last edited by Jean; 05-16-2007, 10:08 PM.
    Mtech1 v8 build thread - https://www.r3vlimited.com/board/sho...d.php?t=413205



    OEM v8 manual chip or dme - https://www.r3vlimited.com/board/sho....php?p=4938827
  • Axxe
    No R3VLimiter
    • Aug 2004
    • 3355

    #2
    How much are you looking to get? Any rust? I take it the car doesn't run right now.


    Keep it slideways!!

    Comment

    • Jean
      Moderator
      • Aug 2006
      • 18228

      #3
      Originally posted by Axxe
      How much are you looking to get? Any rust? I take it the car doesn't run right now.
      There is no body rust, the only rust is on the lower "jacking" points where side skirts would go on because paint there is gone from improper jacking. The 2nd spot that has only light surface rust is front battery box area. I sanded it down few months ago.

      Car runs, it does idle somewhat high at about 1200rpm. I daily it every other day, fastest I got it upto was about 120-125 in top of 4th.
      Mtech1 v8 build thread - https://www.r3vlimited.com/board/sho...d.php?t=413205



      OEM v8 manual chip or dme - https://www.r3vlimited.com/board/sho....php?p=4938827

      Comment

      • MR 325
        Moderator
        • Oct 2003
        • 37828

        #4
        Damn, I can't believe you're thinking about selling the car after all of that work you put in to it!

        Good luck with whatever you do.
        BimmerHeads
        Classic BMW Specialists
        Grover Beach, CA

        www.BimmerHeads.com

        Comment

        • Mtriple
          No R3VLimiter
          • Dec 2003
          • 3139

          #5
          :(
          Originally posted by Simon S
          When a dream is a dream for too long - it becomes a fantasy..

          Comment

          • Mot
            45 toting redneck
            • Jul 2004
            • 4018

            #6
            any interest is just selling it as a rolling shell? I don't need a m10 drive train.

            Comment

            • MR 325
              Moderator
              • Oct 2003
              • 37828

              #7
              Originally posted by Mot
              any interest is just selling it as a rolling shell? I don't need a m10 drive train.
              I doubt he does either, haha. This would be a sick car for your 24v though!
              BimmerHeads
              Classic BMW Specialists
              Grover Beach, CA

              www.BimmerHeads.com

              Comment

              • Mot
                45 toting redneck
                • Jul 2004
                • 4018

                #8
                I know, early model black car ftw!

                Comment

                • Jean
                  Moderator
                  • Aug 2006
                  • 18228

                  #9
                  Ok sorry guys, gf found out I put it up for sale (was talking to a friend of mine on the phone and she figured it out) and got mad. It's fucking hilarious she doesn't even like the car as it's got no a/c, too loud and stiff blah blah blah but doesn't want me to sell it since I've spent so much time on it ... so I got convinced to keep it and finish with the remaining items left to do...

                  please delete ..
                  Mtech1 v8 build thread - https://www.r3vlimited.com/board/sho...d.php?t=413205



                  OEM v8 manual chip or dme - https://www.r3vlimited.com/board/sho....php?p=4938827

                  Comment

                  • 8atman
                    E30 Addict
                    • Apr 2007
                    • 492

                    #10
                    Originally posted by MR 325
                    Damn, I can't believe you're thinking about selling the car after all of that work you put in to it!

                    Good luck with whatever you do.
                    x2 :0

                    Comment

                    Working...