So here's the deal. My white E30 has been sitting in my driveway on jackstands for months now and between my house and working on customer cars at the shop I simply don't have the time or space to build this thing any time in the near future so its up for sale.
First off....no lowballers. If it doesnt sell I will keep it untill I do manage to find the time.
Second.....I will NOT part out this stuff. All or nothing...as I said. If it doesnt sell Ill keep it.
Car: 1989 Alpine white 325i
Only rust on the car is a few small spots of very light surface oxidation
Stock motor/tranny is removed and sold
Tan interior, door panels, carpet, rear seat all there. No headliner
MINT vinyl sport seats
Crack free dash
All glass is good
No gas tank. Planned to use a fuel cell.
All tar paper sound deadening removed from floors
Undercoating removed and underside sprayed flat black
No engine wiring harness
Heat only climate control panel
Most of the forward chassis harness is pulled apart to remove any unessecary wires.
Rear subframe is out of car and painted flat black
Rear wheel arches are rolled flat on the inside
Diff is apart and housing is cleaned and painted.
No front bumper, valence, grills, or headlights.
No suspension is on the car right now aside from the front trailing control arms and strut assemblies so it will have to be lifted onto a trailer.
Parts that come with the car:
6.0L LSx long block. 60k miles. Internally gorgeous. Heads are off so you can see for yourself. Comes with the stock heads as well as the truck intake.
HPE Stage 3 CNC ported 5.3L heads. Makes a 6.0L ~10.1 compression. About 3k mile on them. These sell for $2195 new alone. http://www.horsepowerengineering.com...icture_39.html Valvetrain good to .600 lift cams.
4L60E Automatic transmission with 3,000RPM stall converter. Tranny sate for awhile and will need a general rebuild kit to replace the seals.
318ti rear trailing arms, brakes, axles, hubs. Backing plates are a little bent up but everything looks good.
5 Borbet 17" type E 5 lug wheels. 4 have decent tires, the 5th is a bare wheel. 4 are almost flawless, one has some light chipping around the edge.
7 series hydroboost brake booster setup to clear valve cover.
AKG Poly diff bushing
AKG Poly subframe bushings
AKG e36 steering rack adapter kit
Local pickup only obviously. $3000
Im probably forgetting other parts but I will list them as I think of it. I will take pics next week. If your serious, your more than welcome to come by and check everything out first hand.
jon@666fabrication.com
First off....no lowballers. If it doesnt sell I will keep it untill I do manage to find the time.
Second.....I will NOT part out this stuff. All or nothing...as I said. If it doesnt sell Ill keep it.
Car: 1989 Alpine white 325i
Only rust on the car is a few small spots of very light surface oxidation
Stock motor/tranny is removed and sold
Tan interior, door panels, carpet, rear seat all there. No headliner
MINT vinyl sport seats
Crack free dash
All glass is good
No gas tank. Planned to use a fuel cell.
All tar paper sound deadening removed from floors
Undercoating removed and underside sprayed flat black
No engine wiring harness
Heat only climate control panel
Most of the forward chassis harness is pulled apart to remove any unessecary wires.
Rear subframe is out of car and painted flat black
Rear wheel arches are rolled flat on the inside
Diff is apart and housing is cleaned and painted.
No front bumper, valence, grills, or headlights.
No suspension is on the car right now aside from the front trailing control arms and strut assemblies so it will have to be lifted onto a trailer.
Parts that come with the car:
6.0L LSx long block. 60k miles. Internally gorgeous. Heads are off so you can see for yourself. Comes with the stock heads as well as the truck intake.
HPE Stage 3 CNC ported 5.3L heads. Makes a 6.0L ~10.1 compression. About 3k mile on them. These sell for $2195 new alone. http://www.horsepowerengineering.com...icture_39.html Valvetrain good to .600 lift cams.
4L60E Automatic transmission with 3,000RPM stall converter. Tranny sate for awhile and will need a general rebuild kit to replace the seals.
318ti rear trailing arms, brakes, axles, hubs. Backing plates are a little bent up but everything looks good.
5 Borbet 17" type E 5 lug wheels. 4 have decent tires, the 5th is a bare wheel. 4 are almost flawless, one has some light chipping around the edge.
7 series hydroboost brake booster setup to clear valve cover.
AKG Poly diff bushing
AKG Poly subframe bushings
AKG e36 steering rack adapter kit
Local pickup only obviously. $3000
Im probably forgetting other parts but I will list them as I think of it. I will take pics next week. If your serious, your more than welcome to come by and check everything out first hand.
jon@666fabrication.com
Comment