This car was in Bellingham for a bit.
Announcement
Collapse
No announcement yet.
E30 S50 Supercharged 401whp
Collapse
X
-
Yes it was.... Shipping from WA to VA is a bitch...Turbo E30
Roadkill 80lb 93 octane OBDI tune
BavSol Cylinder Head
Stock S50 in. cam Schrick ex. cam
Otis' tubular T4 manifold
Oringed 87mm S52, Eagle rods and 8.5:1 CP pistons.
GT4094r w/Batmowheel Impeller
614whp@17.5psi, 100 Oct
690whp@21psi, 100 Oct
801whp@27psi, 110 URT
Old: 1/4 mile: 10.91@144.38 (636whp)
New: ?
http://www.youtube.com/watch?v=L_f7fUVqblI
Comment
-
Thanks! It will continues to get better as well, I just picked up an S52 block which will be used to build a forged, low compression engine to help me max out the new T-trim...
I have been working with Dave at Bavarian solutions and I may be picking up a fully ported head for the S52 build. The car currently has water-meth injection and after reading and speaking with some very knowledgeable guys at alcohol injection systems I am planning on running a pre-compressor water meth nozzle as well. This will drastically reduce IAT's and allow me to run a more radical tune.
As mentioned before I will not be home until October-ish so the pictures and updates will not be as quick as everyone would like but I will keep this thread updated every so often.Turbo E30
Roadkill 80lb 93 octane OBDI tune
BavSol Cylinder Head
Stock S50 in. cam Schrick ex. cam
Otis' tubular T4 manifold
Oringed 87mm S52, Eagle rods and 8.5:1 CP pistons.
GT4094r w/Batmowheel Impeller
614whp@17.5psi, 100 Oct
690whp@21psi, 100 Oct
801whp@27psi, 110 URT
Old: 1/4 mile: 10.91@144.38 (636whp)
New: ?
http://www.youtube.com/watch?v=L_f7fUVqblI
Comment
-
...Update...
The car has finally arrived at Racewerks in Virginia Beach. They will be installing the Stage 3 Bavarian Solutions CNC'ed/O-ringed head, Schrick cams, .140 headgasket, arp 2000 studs and SS rep header.Turbo E30
Roadkill 80lb 93 octane OBDI tune
BavSol Cylinder Head
Stock S50 in. cam Schrick ex. cam
Otis' tubular T4 manifold
Oringed 87mm S52, Eagle rods and 8.5:1 CP pistons.
GT4094r w/Batmowheel Impeller
614whp@17.5psi, 100 Oct
690whp@21psi, 100 Oct
801whp@27psi, 110 URT
Old: 1/4 mile: 10.91@144.38 (636whp)
New: ?
http://www.youtube.com/watch?v=L_f7fUVqblI
Comment
-
Stock head is off, new head should be arriving today.... Hopefully she will be back on the road in a few days...
EDIT: Bavarian Solutions stage 3 head arrived at racewerks... YES!Last edited by rneedham1979; 08-26-2009, 08:52 AM.Turbo E30
Roadkill 80lb 93 octane OBDI tune
BavSol Cylinder Head
Stock S50 in. cam Schrick ex. cam
Otis' tubular T4 manifold
Oringed 87mm S52, Eagle rods and 8.5:1 CP pistons.
GT4094r w/Batmowheel Impeller
614whp@17.5psi, 100 Oct
690whp@21psi, 100 Oct
801whp@27psi, 110 URT
Old: 1/4 mile: 10.91@144.38 (636whp)
New: ?
http://www.youtube.com/watch?v=L_f7fUVqblI
Comment
-
Actually Racewerks sent me some last night. I will start a new thread in the 24v swap section. I will place the link here..Turbo E30
Roadkill 80lb 93 octane OBDI tune
BavSol Cylinder Head
Stock S50 in. cam Schrick ex. cam
Otis' tubular T4 manifold
Oringed 87mm S52, Eagle rods and 8.5:1 CP pistons.
GT4094r w/Batmowheel Impeller
614whp@17.5psi, 100 Oct
690whp@21psi, 100 Oct
801whp@27psi, 110 URT
Old: 1/4 mile: 10.91@144.38 (636whp)
New: ?
http://www.youtube.com/watch?v=L_f7fUVqblI
Comment
Comment