Announcement

Collapse
No announcement yet.

WI: 1989 Alpine 325is Black Sport Interior, 149k $5250 obo

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    WI: 1989 Alpine 325is Black Sport Interior, 149k $5250 obo

    **SOLD 5/3/09**


    Price reduced: $4950 obo or as low as $3950 obo with below items removed.

    I can remove a few parts to lower the price, if someone wishes

    Part/Credit
    Euro Ellips/$200 (would be replaced by Sealed beams)
    F+R Strut bars/$100
    Wheels+Tires/$700 (would be replaced by Stock steelies w/snow tires)

    Up for sale is my 1989 BMW 325is. $5250, obo. It has an Alpine White exterior and the black leather sport interior. Currently has 149,000 miles, and runs great. Was garaged this past (almost current) winter.

    VIN: WBAAA2309K4494375

    I bought this car from my brother ZM Blue Devil, and was originally purchased by a woman who kept detailed service records over the 18 years she owned it. I have a thick folder of all the receipts that will come with the car. Here is a list of the latest service done, over the last two years I and my brother have owned it:

    at around 120,000 miles
    -swap from automatic transmission, to a 5-speed manual, including resurfaced flywheel and new clutch and pressure plate, as well as a M Z3 short shifter
    -Fluid Change on the 4.10 LSD
    -H&R Race Springs with Bilstein Sport Shocks
    -New Brake Rotors, Pads, pad wear sensor and Stainless Steel Brake Lines
    -New Front and Rear Wheel Bearings
    -RD Front and E30M3 Rear Sway Bars
    -IE Front and Rear Strut Bars and Rear Shock Mounts
    -New Coil, Plugs, Wires and Distributor Cap
    -New Radiator and all hoses
    -New OEM Engine Mounts and IE Transmission Mounts
    -Valve Adjustment and New Valve Cover
    -Front Control Arms, Tie Rods and Sway Bar links
    -Timing Belt and Water Pump

    at around 140,000 miles
    -Fuel Pump
    -K&N Air Filter
    -New Exhaust Manifold Studs and Gaskets
    -Front Rotors Resurfaced and New Pads
    -New SI Board for the Instrument Cluster

    at around 145,000 miles
    -Heater Core, Thermostat, Heater Valve, Metal Hoses and o-rings
    -Washer Fluid Cap, Hood Squirters and T-valve for Fluid
    -New/Rebuilt and Balanced Driveshaft from Mesa Performance, along with a New Center Support Bearing and Guibo.
    -New DP Motorsport Wheels. 15x6.5 ET38, along with New Goodyears. Using 20mm spacers with 80mm TMS Extended Wheels Studs.
    -New Battery

    Additional Modifications
    -Hella Smoked Smiley Headlights. Laminx covered since new.
    -DDM 35w 5000k HID Kit, Light up the Road Great
    -OEM Fog lights w/Laminx
    -Euro Trim which Eliminates the Sidemarkers
    -Euro Front Grills
    -Original MT1 Sport Steering Wheel
    -New Cassette Holder Center Console w/New Ashtray
    -New Interior Light Lenses
    -New OEM ZHP Shift Knob and Leather E-brake Handle
    -Complete Set of OEM Steel Wheels w/Winter Tires
    -Full Size 14" OEM Basketweave Spare

    Needs
    -Car is great. The time has come for this car to get some cosmetic attention. While it still looks great, there are a few rust spots developing that should be taken care of before they get out of hand. They seem like simple enough repairs, and once taken care of, with a fresh coat of white, this car will be a reliable head turner.

    -The interior is in great condition. Rear seats and door cards are great. The front seats are showing some wear, however not torn. I am including a bottle of Leatherique Black Leather Dye which will restore them quite nicely.

    -Car uses about 1/4 quart between its regular oil changes, nothing out of the ordinary for a motor this old. Still strong. Good idle and a Custom E36 UUC Exhaust welded on, Nice Tone.

    Any other questions, please feel free to email and we'll talk more. Thanks for looking.





    More Pictures Can be Found Here: http://s59.photobucket.com/albums/g3...ma%20Apr%2009/

    *Car Will not come with the Rear License Plate Filler (the section between the taillights), but with a Euro plate filler instead.

    *Also, please, no trades. Looking for a Sale only. Local Sale Preferred, but can deliver for a fee.

    *Any problems with my asking price? Please PM me and we'll discuss it.
    Last edited by BrewCity11; 05-03-2009, 11:02 PM.
    turk@gutenparts.com

    Originally posted by Janderson
    Properly placed zip ties will hold bridges together.

    #2
    nice clean car -- have seen it and ridden in it before. Good luck with the sale Turk.

    What's next for you?

    Comment


      #3
      +1 on it being a nice car, was a passenger in it when it was on the east coast and have seen first hand the work that ZM put into the car before he sold it to his bro.
      BMWCCA #389756

      Comment


        #4
        This car looks great, i will definitely keep it in mind, if my car sells

        Flickr

        @michael.colby on Instagram


        "All he needed was a wheel in his hand and four on the road"

        Comment


          #5
          Thanks for the compliments guys.

          I'm looking to move on to an E30 with more doors, and a more comfortable ride. The time will come for another "fun car" project.

          VIN added, cause i forgot.
          turk@gutenparts.com

          Originally posted by Janderson
          Properly placed zip ties will hold bridges together.

          Comment


            #6
            car looks really nice, (tail light extensions though? eeeee)

            Comment


              #7
              BUMP for a clean car.

              Very nice car
              taste fully modded.
              to each his own on some of the modifications but they are easily changed.


              To whomever purchases this car. fix the minor rust issues and you have your self a very nice car.

              i like your cluster. I have wanted to do the black cluster rings modification for a while and have never found someone who has had done it before and it taken pictures. I would like to also add the alpina stripe just for aesthetics.
              all on the vdo cluster with red needles and km speedometer





              -
              Project
              Parts for Sale
              Feedback
              YouTube Channel

              Comment


                #8
                Thanks buddy ^
                turk@gutenparts.com

                Originally posted by Janderson
                Properly placed zip ties will hold bridges together.

                Comment


                  #9
                  Hope it ends up with someone that will love it as much as we did. I have a ton of pictures, during the refresh stage. As noted lot of new/nice parts on this beauty.

                  Good luck with the sale bro!
                  sigpic
                  New website releasing soon www.gutenparts.com Guten Parts + Service | Facebook | Twitter
                  ____________________________________

                  Levent
                  %20levent@gutenparts.com

                  ____________________________________
                  Ladies:
                  1998 E36 m3/4/5 1988 325i 1989 325iT

                  Comment


                    #10
                    if he's anything like his brother he's a good seller and a good guy... bump for you broham!

                    Comment


                      #11
                      Appreciate the vouch. This car was very well taken care of, by all owners:
                      turk@gutenparts.com

                      Originally posted by Janderson
                      Properly placed zip ties will hold bridges together.

                      Comment


                        #12
                        Bump cause I got a fresh coat of black on the rockers today. Looks much better.
                        turk@gutenparts.com

                        Originally posted by Janderson
                        Properly placed zip ties will hold bridges together.

                        Comment


                          #13
                          Hey I ran your vin number and found some information that you might want to know.

                          If you want me to remove this let me know.

                          take note this car doesn't have an autotragic transmission
                          it has a 5 speed. :mrgreen:
                          VIN long WBAAA2309K4494375

                          Type code AA23

                          Type 325I (USA)

                          Dev. series E30 ()

                          Line 3

                          Body type LIM

                          Steering LL

                          Door count 2

                          Engine M20

                          Cubical capacity 2.50

                          Power 125

                          Transmision HECK

                          Gearbox AUT

                          Colour ALPINWEISS 2 (218 )

                          Upholstery SCHWARZ LEDER ( 0203 )

                          Prod. date 1988-10-22


                          Order options
                          No. Description
                          209 LIMITED SLIP DIFFERENTIAL (25%)

                          226 SPORTS SUSPENSION SETTINGS

                          281 LM-RAD 6 1/2 X 14

                          324 FRONT-UND HECKSPOILER

                          401 SLIDING/VENT ROOF, ELECTRIC

                          410 WINDOW LIFTS, ELECTRIC AT FRONT

                          481 SPORT SEATS F DRIVER/FRONT PASSENGER

                          530 AIR CONDITIONING

                          540 CRUISE CONTROL

                          551 ON-BOARD COMPUTER II W REMOTE CONTROL

                          562 MAP READING LIGHT

                          675 BMW SOUND SYSTEM

                          708 M-SPORT LEATHER STEERING WHEEL II

                          841 AUSSENSP.IN WAG.FA.U.325IS SCH

                          925 SHIPPING PROTECTION PACKAGE


                          -
                          Project
                          Parts for Sale
                          Feedback
                          YouTube Channel

                          Comment


                            #14
                            THanks for running the VIN!
                            turk@gutenparts.com

                            Originally posted by Janderson
                            Properly placed zip ties will hold bridges together.

                            Comment


                              #15
                              Wow this thing has not sold.

                              Comment

                              Working...
                              X