this kit is a Full pnp e30 obd1 m50tu swap harness kit (also m52, s50 and s52 with custom program chip)
e30 to e36 adapter harness for 87-91 325 I or IS and 91-93 318I or IS . Note* will work on early cars but adapter harness will have to be repined, for later models like the eta or e for early 318i or 325e different e30 side plug will be needed.
*what does this kit support *
Support oil level check control on your obc
Check engine light (stomp test will also work!!)
Oil service indicator on cluster, (indicator will also be resetable with service tool)
e30 coolant temp gauge on cluster will also work correctly with swap
oil psi light ( ie the dummy light)
fuel economy gauge ( note will not be accurate unless you buy the converter)
Note* (the kit does not support a/c or cruse control systems)
*what is in the kit *
* Note (Harness uses stock e30 325i main power wire from battery terminal to starter)
Only other part needed for the kit is a stock m50 o2 sensor about $40 new.
At this time I only have one full kit for and I do not want to separate it
$550 +shipping
But if you need just the adaptor made for you conversation or your harness modified and label for install I can also do that as well
E30 to e36 harness adapter harness $150
(Note* you must provide you e30 & e36 harness plugs)
E36 harness prepping for your e30 $100 for both non-vanos and vanos harness
(Adding oil level obc plugs and service indictor reset function, and label connections for fast painless install) For automatic harness add $30 for removal of extra plugs and second ecu plugs for auto to 5 speed conversations
E34 harnesses $120 includes all of the above with re-pin for oil level sender
(Auto harness add $35 for removal of extra plugs and second ecu plug)
Thanks pleas pm or email me at
Nitroman12@gmail.com
e30 to e36 adapter harness for 87-91 325 I or IS and 91-93 318I or IS . Note* will work on early cars but adapter harness will have to be repined, for later models like the eta or e for early 318i or 325e different e30 side plug will be needed.
*what does this kit support *
Support oil level check control on your obc
Check engine light (stomp test will also work!!)
Oil service indicator on cluster, (indicator will also be resetable with service tool)
e30 coolant temp gauge on cluster will also work correctly with swap
oil psi light ( ie the dummy light)
fuel economy gauge ( note will not be accurate unless you buy the converter)
Note* (the kit does not support a/c or cruse control systems)
*what is in the kit *
- Full Obd1 e36 harness w/added circuit for oil level sender that is fully label ready for install, also modification to haress so that the indicator can also be reset w/tool
* Note (Harness uses stock e30 325i main power wire from battery terminal to starter)
- Untouched 413 red label dme (no $100+ ews delete chip needed)
- Stock m50 obd maf
- e36 dme coolant sensor
- m20 cluster coolant senor
- e36 2x nock sensors
- e36 crank sensor
- e36 cam sensor
- e36 air temp sensor
- e36 iac
- e36 tps sensor
- e36 oil psi sensor
Only other part needed for the kit is a stock m50 o2 sensor about $40 new.
At this time I only have one full kit for and I do not want to separate it
$550 +shipping
But if you need just the adaptor made for you conversation or your harness modified and label for install I can also do that as well
E30 to e36 harness adapter harness $150
(Note* you must provide you e30 & e36 harness plugs)
E36 harness prepping for your e30 $100 for both non-vanos and vanos harness
(Adding oil level obc plugs and service indictor reset function, and label connections for fast painless install) For automatic harness add $30 for removal of extra plugs and second ecu plugs for auto to 5 speed conversations
E34 harnesses $120 includes all of the above with re-pin for oil level sender
(Auto harness add $35 for removal of extra plugs and second ecu plug)
Thanks pleas pm or email me at
Nitroman12@gmail.com
Comment