I have 2 left. First come, first serve. Ready to ship.
Shipping is USPS.
$50 + $FREE Shipping.
PAYPAL: george.graves@gmail.com
(Youtube version here: http://www.youtube.com/watch?v=xjPSJVDmgaU)
It works just like newer BMW’s, when you close your driver’s door, it keeps the the lights on, and then slowly fades out over a period of about 30-45 seconds.
It has an added feature that when you turn the key, it dims down the light quicker, so that you can start driving. Anyone that had driven a newer BMW knows this feature. It adds a really cool lighting effect, and is very useful at times. Like when you need to read a map real quick.
- Over 250 happy customers!
- Quality construction
- PWM (pulse width modulation) design uses very little current, less then the stock relay
- Custom printed circuit board.
- Replaces stock relay
- No cutting, no splicing
- Installation only requires a Phillips head screw driver and a 8mm socket.
- Bench tested to over 50,000 cycles with out failure, about 6+ years of normal use
Here is a look "under the hood"
- remove the drivers side bottem dash cover to gain access to the hood release cable bolts (8mm) and remove the bolts.
- Remove the speaker panel and the speaker.
- Remove the two screws that is just below the speaker opening and reach into the speaker cavity and pull the bracket out
- Remove relay, and plug in the new dimmer mod.
- button it back up and you are done.
Thanks you all, and I hope you enjoy!
George Graves
Shipping is USPS.
$50 + $FREE Shipping.
PAYPAL: george.graves@gmail.com
(Youtube version here: http://www.youtube.com/watch?v=xjPSJVDmgaU)
It works just like newer BMW’s, when you close your driver’s door, it keeps the the lights on, and then slowly fades out over a period of about 30-45 seconds.
It has an added feature that when you turn the key, it dims down the light quicker, so that you can start driving. Anyone that had driven a newer BMW knows this feature. It adds a really cool lighting effect, and is very useful at times. Like when you need to read a map real quick.
- Over 250 happy customers!
- Quality construction
- PWM (pulse width modulation) design uses very little current, less then the stock relay
- Custom printed circuit board.
- Replaces stock relay
- No cutting, no splicing
- Installation only requires a Phillips head screw driver and a 8mm socket.
- Bench tested to over 50,000 cycles with out failure, about 6+ years of normal use
Here is a look "under the hood"
- remove the drivers side bottem dash cover to gain access to the hood release cable bolts (8mm) and remove the bolts.
- Remove the speaker panel and the speaker.
- Remove the two screws that is just below the speaker opening and reach into the speaker cavity and pull the bracket out
- Remove relay, and plug in the new dimmer mod.
- button it back up and you are done.
Thanks you all, and I hope you enjoy!
George Graves
Comment